Improve flow and performance in your 1993-95 F-150 Lightning with a set of AFR aluminum cylinder heads! This set features a 185cc design that flows drastically more air compared to stock. AFR is one of the most advanced cylinder head companies in the world and continue to prove it with superior quality and performance. This pair of cylinder heads is the AFR Renegade series which are emissions legal and will bolt right up to all of your factory components making these an excellent upgrade over the factory heads. See all of the flow specs below.
Brand: Airflow Research
Manufacturer's Part Number: 1422
Cylinder Head Style: Assembled
Cylinder Head Material: Aluminum
Combustion Chamber Volume (cc): 58cc
Intake Runner Volume (cc): 185cc
Exhaust Runner Volume (cc): 68cc
CNC-Machined Intake Runner: Yes
CNC-Machined Exhaust Runner: Yes
Intake Valve Diameter (in): 2.020 in.
Exhaust Valve Diameter (in): 1.600 in.
Maximum Valve Lift (in): 0.600 in.
Outside Diameter of Outer Spring (in): 1.290 in.
Number of Springs Per Valve: Dual
Rocker Arm Studs Included: Yes
Rocker Arm Nut Thread Size: 3/8-24 in.
Rocker Arms Included: No
Rocker Arm Nuts Included: No
Guideplate Pushrod Size: 5/16 in.
Accessory Bolt Holes Drilled: Yes
Intake Valve Angle: 20
Exhaust Valve Angle: 20
Oiling Style: Through pushrod
Machined for O-Ring: No
Heat Crossover: Yes
Quantity: Sold as a pair
These cylinder heads will accept factory emissions (AIR Injection) and are street ported.
Some piston modification may be needed depending on your specific application.
AFR - Cylinder Heads Built for Racers... by Racers
If you are wanting to make big power in your Mustang or Lightning, look no further than AFR (Air Flow Research). They have dedicated over thirty years to research and developing cylinder heads and flow dynamics to make the most horsepower possible. Cylinder heads manufactured by AFR can be found on cars on both street cars and race cars. These fully assembled heads outflow and out perform other cylinder heads on the market!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!