1979-04 Ford Mustang Rear Shock Tower Brace Black

Mustang Rear Shock Tower Brace Black (79-04)


Details   |  Description   |  Customer Photos   |  Reviews   |   Community Q&A
  • Mustang  Rear Shock Tower Brace Black (79-04)
  • Mustang  Rear Shock Tower Brace Black (79-04)
Mustang  Rear Shock Tower Brace Black (79-04)
  • Mustang  Rear Shock Tower Brace Black (79-04) - Picture of Mustang  Rear Shock Tower Brace Black (79-04)
  • Mustang  Rear Shock Tower Brace Black (79-04) - Picture of Mustang  Rear Shock Tower Brace Black (79-04)
Item #LRS-RSTBRC

Everyday Low Price: $79.99

In Stock
Ships tomorrow!


Add to cart


Benefits

  • Reduces Chassis Flex
  • No Sacrifice of Ride Quality

Features

  • Quality Steel Construction
  • Easy Installation
  • Stainless Attaching Hardware Included

What's in the Box

  • (1) Rear Strut Tower Brace
  • (2) Attaching Brackets
  • (8) Attaching Bolts

Made in the USA

Product Description

Further limit g-loading with a rear shock tower brace. This Rear shock tower brace mounts in between to rear shock towers of your 1979-2004 Mustang to reduce the amount of chassis flex incurred during hard cornering. This rear brace comes with mounting brackets that attache to the body of the car and then the cross brace bolts in to keep the chassis from excessive movement.

* * *Note: Not for use on convertible applications.* * *

See what our customers have to say about this product!
Check out customer reviews and questions.


Customer Photos (3)



Product Reviews (5)


4.4
out of 5 stars
4.5 stars
5 reviews
5 stars    3
4 stars    1
3 stars    1
2 stars    0
1 star    0

100%
OF CUSTOMERS
RECOMMEND THIS PRODUCT
5 of 5 REVIEWS
RECOMMEND THIS PRODUCT
5 of 5 REVIEWS


5 Stars   great product
By on 3/1/2014
Super strong. Takes all the tower sway out of rear end. Nice wrinkle black coating.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

4 Stars   Well made & nice fit
By on 7/27/2015
Image uploaded by robert l. This is a nice looking product and not too hard to install as long as you have an extra two hands. This install was the last piece of my bracing puzzle. I have a K-member brace, front shock tower brace, full length weld-on subframe connectors, and panhard bar but I still heard some creaking in the rear of the car. At first I was surprised to see the angles of the brackets when I test fit the brace, it just didn't seem like it would fit properly. I figure that that they put a little extra bend in these brackets so that they are sure to fit between the towers because the torque down procedure pulled them into the proper position easily. Does it work? I dunno. I was surprised how thin the fender well metal is where this thing attaches! It is super thin! I think it helped my "creaking issue" but that could stem from my amps being mounted to the rear seat brace. It no doubt helps support there area where it mounts, but the question is, is that really a weak area of the car? So, the take home message: it's nice, it's strong, it's not that hard to install, and it's only $80 so why not!? You decide.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Worth the money
By on 8/17/2014
I put this brace in my 83 gt and even though it was a slight pain in the ass locating the holes and making sure the brackets and stuff where straight level and in the right place I would do it all over again. Even after I put all new HR super race springs and new bushings and tubular control arms in the rear and a front steeda swaybar and rear belltech swaybar this strut Brace really did add to the handling and feel and if done right looks good and is sturdy.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Awesome high quality product!
By on 12/23/2014
Image uploaded by Jaimes H. Shock tower brace looks awesome in car and seems like a super sturdy, high quality product! You will need 2 people to hold it in place before installation to mark it and make sure it's level. Kind of a pain to install but worth it when it's done. Depending on your ride height you might not even need to take the wheels off. Thanks Latemodel

Yes, I would recommend this item to a friend!


Was this review helpful to you?

3 Stars   Does not fit Fox Body Convertibles
By on 6/18/2014
I purchased this item thinking it would fit all 79-04 mustangs but was not happy to find out it will not fit my '89 convertible. It sits too high into the well liner to let the top retract completely. The item is made of good quality though and I ended up giving it away to one of my friends with a '99.

Yes, I would recommend this item to a friend!


Was this review helpful to you?


Community Q&A (4)

Vehicle Applications

Ford Mustang - 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93) - 1994 (94) - 1995 (95) - 1996 (96) - 1997 (97) - 1998 (98) - 1999 (99) - 2000 (00) - 2001 (01) - 2002 (02) - 2003 (03) - 2004 (04)


Look for Similar Items by Category

Ford Mustang Parts » Mustang Suspension & Chassis » Mustang Chassis Stiffening Parts » Mustang Strut Tower Braces
Ford Mustang Parts » Mustang Suspension & Chassis » Mustang Chassis Stiffening Parts » Mustang Strut Tower Braces » 1979-1993 Strut Tower Braces

Products by Vehicle