Replaces Rusted, Damaged, or Missing Factory Brackets
OE Style Steel Construction
12 Gauge Steel
Pre-bent Sway Bar Brackets
Factory Style Holes
What's in the Box
(1) LH Lower Sway Bar Bracket
(1) LH Upper Sway bar Bracket
(1) RH Lower Sway Bar Bracket
(1) RH Upper Sway Bar Bracket
Over the years your 1979-1993 Foxbody Mustang has more than likely seen it's share of abuse and Exposure to the elements. Many of these cars have sway bar brackets that are bent up, rusted out, or even cut off from years past. These sway bar brackets are the perfect answer to make sure your sway bar is where its supposed to be. This sway bar mount kit features both Left hand and right hand Replacement brackets. The utilize OEM style stamped steel construction and include the factory holes for a proper look.
* * * NOTE: This is a weld together product, Latemodelrestoration.com recommends these be installed by a professional!* * *
50resto - Dedicated To The Preservation Of The Fox Body Mustang
50resto is your trusted source for 1979-93 Mustang Foxbody restoration products. Buy 50resto products from Latemodel Restoration Supply and receive the best value, quality and industry-leading customer service. Whether you need Fox Body Mustang weatherstrip, headlights, taillights, seals, body panels, hardware, door handles, trim parts, carpeting or upholstery, 50resto is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
Working in a customer service oriented job I can truly appreciate minute by minute notifications and incredible customer service. I am building my seventh fox and have dealt with every known distributor on the planet and LMR is by far the most efficient and thorough company I have dealt with.(twisted wedge top end kit and supporting equipment project starting this week)
My name is Bryan Bayer and this is my 1988 Mustang GT. Currently going through the process of smoothing the engine bay and building a new motor. Motor is a stock short block 302 with GT40P heads and t...