This part ships for FREE via UPS Truck Freight shipping!
Gives Your Mustang The Unmistakable Look Of A 93 Cobra
High Quality Urethane Construction
Design Cues Taken From The Original Cobra Parts
What's in the Box
(1) 93 Cobra Rear Bumper Cover
(1) 93 Cobra Rear Spoiler
(1) Pair 93 Cobra Side Skirts
(1) Pair 93 Cobra Fender Extenstions
(1) 93 Cobra Grille Insert Kit
There is no arguing that the 1993 Cobra has become the Icon in the fox body world. The 93 Cobra Body Kits is one of the most sought after kits on the market today. LRS has put together this complete 1993 Cobra Body kit to help you achieve that legendary look you desire for your 1987-1990 Fox Body Mustang. The LRS-COBRAKIT87 is designed for the 1987-1990 Mustang with the smaller front fender wheel well openings. Kit includes the following parts.
Video: 1993 SVT Cobra Conversion Body Kit (87-93 Fox Body Mustangs)
Published on 2014-02-07
Want your Fox Body Mustang to have the iconic look of the 1993 SVT Cobra? You are in luck! We carry a complete Cobra conversion body kits for 87-93 hatchback Mustangs. This kit includes high quality urethane components that will drastically transform the exterior of your Foxbody Mustang.
This kit is built to convert any 1987-93 GT model Fox Body Mustang. It can be used on any LX model if you add the following parts to kit: LRS-8190D front bumper cover LRS-20938B door molding LRS-20939B door molding
NOTE: These are not Ford Factory Replacement parts. They are not intended to be replacement parts for original OE 1993 Cobra Parts.
Finsih off your project Fox Body Mustang with the help of LatemodelRestoration.com & 5.0Resto! Click the link above for more details.
If you've always wanted a '93 Cobra, but just haven't been able to find the one you've been dreaming about, you can create your own with the help of our '93 Cobra-style body kit. These kits are intended to fit 1987 and '93 Mustangs, either LX or GT. The kit consists of a grille insert, fender spats, rocker moldings, rear bumper cover, and a rear wing. The wing is molded out of fiberglass, and the rest of the kit is molded out of high-quality urethane.
If you're installing this on an LX, you will need to go ahead and pick up a GT front bumper cover and a set of GT door body side molding. If you're installing this kit on a GT, you'll need to remove all the metal attaching brackets for the factory GT ground effects. And you'll need to pick up a set of LX tailpipes, because your factory GT tailpipes are going to look kind of funny with that '93 Cobra bumper.
If you happen to have a '93 Cobra and you're looking for replacement parts, this kit isn't for you because these parts are aftermarket. They do give you the appearance, but they do attach differently than the factory Cobra pieces. Besides the obligatory trip to the body shop to have all the parts painted to match your car, you will need to have some body work done on your hatch for the wing to fit properly.
The rest of the kit installs pretty easily using double-sided tape and some screws. Very minor drilling is required. To pick up your '93 Cobra body kit, along with any of the supporting parts, like taillight lenses and emblems, check out latemodelrestoration.com.
The 5.0Resto 93 Cobra Grille Insert is made from the original Ford Tooling. It includes insert, chrome running pony emblem, hardware and instructions. This is the perfect solution to convert your Fox Body Mustang into a Cobra clone.
The Cobra Grille Insert features an opening to allow for improved air flow. This provides engine cooling advantages over the factory bumper that did not have any openings. Add some unique 1993 Cobra styling to your Stang with this grille insert. NOTE: It will need to be painted to match.
The 5.0 Resto '93 Cobra Grille Insert Kit is a great way to add a custom, yet OE touch to your '87 to '93 Mustang.
The kit includes a chrome running pony with attaching nut, grille insert, attaching tape, and instructions with a cut out template.
The insert kit is also available kitted with a new GT bumper cover. You'll want to have your insert professionally painted to match your car.
Once painted, you can install your pony using the included attaching nut. To begin installation, carefully cut out the provided template along the outlines.
Tape the template to the bumper cover and mark the cut out area. Transfer the template to the other side and mark that cut out area.
Now for the fun part. To make the cut, we used an air-powered body saw to cut out the opening in the bumper cover.
Apply the supplied attaching tape to the perimeter of the grille insert, center the insert in the cut out, and stick it down.
Short of the needed paint work, this is a relatively easy appearance upgrade that features an OE fit and finish.
Click below to see more 5.0 Resto products for Fox Mustangs at latemodelrestoration.com.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!