Compliments Turbos, Superchargers & other high Hp Applications
90mm Mass Air Meter
90psi 340 lph Fuel Pump
44 lb Injectors
Adjustable Fuel Pressure Regulator
What's in the Box
(1) SCT 90mm Mass Air Meter
(1) Aeromotive Fuel Presure Regulator
(1) Aeromotive 340 Stealth Fuel Pump
(1) Set of (8) TFS 44lb Fuel Injectors
If you're adding a turbo, supercharger or planning for higher horsepower from your 96-97 4.6L Mustang SN95 then you are going to need a High Performance Fuel System Kit. To create more horsepower you need more fuel and this kit is just the ticket to get you on the road to power.
We teamed up TFS 44lb fuel injectors with a SCT 90mm Mass Air Meter, an Aeromotive 90psi 340 Lph Stealth Fuel Pump and finally an Aeromotive Adjustable Fuel Pressure Regulator to dial every thing in. This kit is a must have on supercharged or turbo applications and we've done all the work for you! Pick up yours today!
**Custom Tuning is Required**
86-97 Mustang Fuel Pump Install
86-97 Mustang Fuel Pump Install
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2013-01-15 Do you need to upgrade your fuel pump to keep you with your performance mods? Or has your pump stopped working all together? Watch this video and Jmac will show you how to remove and install a new fuel pump in an 86-97 Ford Mustang. Installation requires you to remove your fuel/gas tank. Upgrading a return style fuel pump on your Fox Body Mustang or SN-95 Mustang is a great way to ensure you your performance Mustang does not get starved of fuel!
We chose to install the BBK 255 Lph Mustang Fuel Pump (part number BBK-1607) on Project Blue Collar. The higher flowing fuel pump was going to make a great fuel foundation for the future upgrades being thrown at Project Blue Collar. The BBK Fuel Pump includes everything needed for an easy installation -- new pump, pump sock filter, wiring pigtail, s hose and hardware kit. With the BBK name you are sure to get top quality products that are all made in The United States (USA).
This BBK Fuel Pump Fits the following years and models of Mustangs: Mustang GT 4.6L, GT & LX 5.0L, V6 3.8L, Cobra 4.6L & 5.0L
Jmac: We're going to start out by removing the fuel pump assembly from the original tank. We're going to be going back in with a BBK 1607 255-liter-per-hour fuel pump. It comes with all the hardware and wiring connections you need to install it back in your Mustang.
Now, you can use a small flat-blade screwdriver and remove the plastic clip that holds on the supply jumper line to the fuel pump assembly. And then use your fuel line remover tool to go ahead and remove the fuel return line from the fuel pump assembly. Unplug your electrical connector. Remove the lock ring. Then lift the fuel pump assembly from the tank.
The sock was no longer attached to the bottom of the pump because the baffle had moved around so much it tore it off. Our fuel pump has already been replaced at some point in its life. But the connectors on a stock fuel pump will look just like this.
Now, to remove your fuel pump, you want to remove the two fasteners on the side of the assembly. That way you can gain access to the pump. Remove the hose. Remove the filter sock. And remove the pump from the hanger.
All right, with the fuel pump removed from the fuel pump assembly, we can go ahead and unhook the electrical connection. If your new fuel pump comes with a new electrical connector, go ahead and cut the wires coming out of the fuel pump assembly. Grab your new electrical connector and the butt connectors supplied with the fuel pump. Cut the connector pigtail to length. And use the supplied butt connectors to attach it to the wiring on the fuel pump assembly.
Now you can plug in your new fuel pump. Remove the red protective cap off the bottom of the pump. And remove the gray protective cap off the top of the pump.
Grab the small rubber insulator and slide it onto the pump inlet. And then grab your S hose. And if required, cut it to length. Attach the hose to the fuel pump assembly. Tighten it down with one of the supplied clamps.
Slide the fuel pump outlet into the other side of the hose and attach it with the other supplied clamp. Put your fuel pump back into the assembly. And reinstall the screws for the side of the assembly. With the assembly completely tightened back down and the pump in place, you can attach your fuel pump strainer sock.
With your fuel pump assembly completely put back together, you can go ahead and fold the sock into the tank. And then slide the pump assembly into place. You can take a peek through the filler neck hole and make sure that the sock and pump find their way into the baffle properly.
Slide the O-ring onto the fuel pump assembly in between the assembly and the tank. Put your lock ring into place. And tap it into the locked position.
We've got our new BBK 1607 255 liter per hour fuel pump installed in the tank. And the tank is ready to go back into the car. Now, you definitely want to replace your filler neck seal with our 5.0 Resto replacement.
And another thing to consider is the filler neck to trunk floor seal, which is often torn or rotted away. We've got you covered with a 5.0 Resto replacement. For more fuel system parts and other installation videos, check out latemodelrestoration.com.
This is by far the best experience I have ever had buying parts for my mustang. There is no other place for me, then LatemodelResto. I have bought multiple parts over multiple orders and have had nothing but a smile from ear to ear. Aaron Westerman was my contact person from LatemodelResto. I could not ask for a better customer service representative than him! He went above and beyond multiple times for me and made my experience with Latemodel the reason I keep coming back. LatemodelResto will continue being my #1 stop for my Mustang parts.