This black SVE cold air intake kit completely replaces the restrictive factory air box in your 1989-1993 5.0 Mustang with a high flow filter assembly for a noticeable increase in horsepower and throttle response. This black...
This SVE Cold Air Intake kit completely replaces the stock factory air box and restrictive paper filter element in your 1989-1993 5.0 Mustang with a high flow filter assembly for a noticeable increase in horsepower and throttle response while filtering out destructive power robbing dust particles. This CAI pulls cooler,denser air from inside the inner fender well to make more power that you can feel.
A cold air kit not only adds more power, it can also affect your Mustang's gas mileage. Seeing a few more miles per tank is always a great advantage between fill ups!
Simple installation allows you to get this on your Mustang and back on the road within 1 hour! More power, great looks and easy installation....What more can you ask for?! Get it all with this new SVE Cold Air Intake for your 1989-93 Mustang 5.0L!
NOTE: This product is NOT smog legal and does NOT provide adequate C.A.R.B. regulation numbers to be legal in California emission standards.
I purchased this intake on a Wednesday and received it on Saturday. Thanks LateModelRestoration!
Initial inspection reveals a a nice kit for the money. Pipes, clamps, filter and all hardware individually bubble wrapped and everything arrived well.
Installation was more or less straight forward. I have a nearly stock 91 GT with original intake manifold and throttle body. Not a 100% perfect fit out of the box and onto the car though. The throttle body to maf pipe is not quite at the right angle so you have to angle the pipe a little bit inward (towards to motor) to get it to clear the strut tower. Even then it rubs on the strut tower. I'm sure if I modified the pipe a little or with a different coupler it would have been a better fit. Over all I'm happy with the product especially for the price paid! I will eventually fix the fitment issue and probably run a larger filter.
Over all installation took about an hour by myself. I installed the filter to the elbow pipe first, then routed it up the fender from under the car.
It would be 5 stars if fitment was better. Otherwise it's a very solid kit and an unbeatable price!
SVE, or Special Vehicle Equipment, is your trusted source for 1979-93 Mustang Foxbody, 1994-98 Mustang SN95, 1999-04 Mustang New Edge, or 2005-present Mustang S197 performance and styling products. Buy SVE products from Latemodel Restoration Supply and receive the best value and quality, with industry-leading customer service. Whether you need Mustang wheels, Mach1 chin spoilers, control arms, subframe connectors, clutches, lowering springs, cold air intake kits, or big brake kits, SVE is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
Products by Vehicle
Email Me When It's Back In Stock!
Email Me When It Arrives!
Upload a Picture
Upload your own picture of the Mustang SVE Cold Air Intake Kit Polished (89-93) 5.0
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com® permission to use it in future advertisements and promotions.
EFI Proline 351, Dyno 530hp,600lbs tq, fun car. Basically the entire powertrain is aftermarket, from the ford racing rear end to the custom cold air intake. I've always wanted to own one since I was a...