If the seat upholstery in your Fox body Mustang is faded and ripped, look no further! LRS has you covered, with custom Mustang seat upholstery that is an excellent upgrade for the original. Don't settle for tattered seats, replace them today!
Makes Your Mustang's Interior Look & Feel Like New Again
Old school Pony Style look for your Fox
Made From OE Patterns
Made in the USA
What's in the Box
(1) Driver Seat Back Upholstery
(1) Driver Seat Bottom Upholstery
(1) Passenger Seat Back Upholstery
(1) Passenger Seat Bottom Upholstery
(1) Rear Seat Back Upholstery
(1) Rear Seat Bottom Upholstery
1992-1993 Mustang Pony Style Sport Seat Uphoslstery
This reproduction Mustang Seat Upholstery is intended for 1992-93 Mustang Convertible with sport high back front bucket seats. This Pony style upholstery features vinyl back & sides with vinyl seating surface & a vintage pony style horizontal panel on the upper front seat back. The color is Scarlet Red with Oxford White seating surface. Sport front seats use a small headrest cover, which is included.
High Quality Vinyl Sport Seat Upholstery for Your Mustang
If the seats in your Mustang have seen better days, a set of new seat upholstery for your Fox body Mustang is just the ticket! Just follow the instructions on our Mustang seat upholstery installation blog by removing the factory seat upholstery and re-cover your Mustang seats with this reproduction kit to make the seats in your Mustang look and feel like new again.
Made From OE Patterns
This Pony style sport vinyl upholstery kit features OE style patterns to match the seats that your Mustang came with from the factory. It adds a great custom touch to any Fox Mustang.
Seat Foam Still OK?
If you are in the market for new seat upholstery for your Mustang, more than likely, you also need to invest in new some new Mustang seat foam. Over time the seat foam in your Mustang will deteriorate, to reveal the seat frame below. Not only is this very uncomfortable to sit on, but can also cause lower back pain. Our seat foam is sold individually so there is no need to purchase seat foam for the passenger side if it's still in good shape. Do your back a favor and check into a fresh set of seat foam today!
- Does both front and back seats!
WarrantyTMI is the only interior manufacturer that offers a Limited Lifetime Warranty. This will cover any workmanship errors caused by the manufacturer and does not cover installation errors or normal wear and tear.
I have "played" with upholstery installation in the past and decided to attempt installing this one. I first went out on the internet and researched both Latemodel Restoration web site and TMI for available "how to" from both sources (nothing is sent with the product). I already had hog rings and hog ring pliers, if you don't, order them too. Once I saw how the existing cover was removed and new one installed using the on line information/videos, I set up a pair of saw horses and began with the back seat since that looked like the easiest of all the installs. The hardest part was finding the two screws that held the back seat in the car. I figured if I had problems with the back seat, I would then bring the front seats to a professional. I figured I could take them out and strip them to save some labor. The back seat fit like a glove and I was so happy with the result, that I decided to attempt the passenger front seat. The cover went on without a problem. The hardest part was getting the cover on the head rest. I learned from that one and when I did the driver's head rest, I stripped and removed the foam back about 4" from the bottom. This made it easier to get the head rest on and also made it easier to tack the wood back on the bottom. The driver's seat was more of a challenge due to the seat foam being worn out. If I had realized that before I took the seat apart, I probably would have ordered new foam. I didn't want to tie the car up any longer than I had (it is my daily driver), so I had some high density foam that I used to reinforce the deteriorated portions of the seat. I did the job without a full time assistant, but I had a friend help me once and my wife a second time (getting the headrest cover on). It takes patience, so if you don't have patience, farm it out!. The Product's fit and color match is excellent. The delivery was quick and the information on when it would arrive was accurate.
TMI PRODUCTS, INC., a family-owned company, was founded in 1982 when the Tuccinardi brothers began making Volkswagen door panels in their family garage in Torrance, California. Today, TMI makes high-value interior automotive components like seating, interior consoles, floor coverings, door panels, convertible roof assemblies, headliners and integrated electronic systems for your Mustang or Lightning. TMI has mastered fast-to-market niche programs. From prototype to production, TMI's streamlined processes integrate emerging technologies for volume or short run projects. TMI's quick response to emerging market opportunities provides the industry with innovative high demand products. And TMI's attentive product refreshment plans for mid-cycle changes enable TMI's partners to offer hot, profitable products.
Shop TMI products to get your leather, vinyl, suede, and cloth Mustang upholstery at LatemodelRestoration.com!
Testimonial: Late model helped build two of my mustangs
I have had a bunch of different mustangs in the past and always was hard to get parts till a friend told me about Late model restoration when I had my 1993 cobra and I found everything I needed to finish that car and am now working on my 1986 gt and am finding everything I need . I had a transmission mount delivered to me without the mounting bolts and they more than made up the difference for the missing bolts ! Out of all the parts I have ordered one mistake ever was very well taken care of . I definitely will plan on finishing my 86 gt with the help of Late model restoration ! Thanks !