Great upgrade for your 2013-2014 Mustang GT or V6!
Trim Black Finish
Pony Grille Emblem with Red, White & Blue Bars
What's in the Box
(1) Boss Grille
(2) Fog Light Block Off Plates
(1) Running Pony emblem with Red, White & Blue Bars
If you own a 2013 or 2014 Mustang GT or V6, and want to add the awesome styling of the Boss 302 to your car, this 2013 Boss 302 Grille is a step in the right direction! This OEM Ford Boss 302 Grille is formed from plastic and finished in satin black. It is a direct replacement for the original grill as well as an upgrade for any 2013 or 2014 Mustang GT or V6. Kit includes the grille, emblem, and fog light block off plates!
Video: Boss 302 Mustang Grille Installation (2013-14 GT & V6)
Published on 2013-09-24
13-14 Mustang Boss 302 Grille Part # LRS-8200BB Brand: Ford Fits: Mustang GT, Mustang V6, Boss 302 Mustang Year Models: 2013 (13) - 2014 (14)
Upgrade your Mustang GT or Mustang V6 with the Boss 302 Grille or Boss 302S Grille. They will set your Mustang apart from the crowd and give you a much more aggressive race inspired appearance. The 2013 Boss 302 Grille features the OEM Ford Boss 302 Grille, Mustang Running Pony Emblem and Fog Light Deletes (Block off plates).
FORD RACING BOSS 302S GRILLE Part #: M8200MBRA M-8200-MBRA Brand: Ford Racing Fits: Mustang GT, Mustang V6, Boss 302 Mustang Year Models: 2013 (13) - 2014 (14)
If you want to go for the "ultra" aggressive look, look no further than the Ford Racing Boss 302s Grille! This Boss 302 Grille features a more open design to let more airflow through the grille for improved cooling. This is the same grille featured on the Boss 302S race cars and is a popular upgrade for 13-14 Boss 302 owners. With the stock grille, the Mustang Boss 302 can overheat when driven hard on the track. This Boss 302S grille helps to remedy that by opening up the fog light block-offs & replacing them with wire mesh. The area around the grille emblem is opened up in between the slats to help even further. The grille comes finished in trim black, but can be painted to match if you desire. This grille is an upgrade for 2013-2014 Mustang GT.
2013 and '14 Mustang GTs were equipped with your standard-issue honeycomb grille with a running grille pony and fog lights. But nobody wants standard issue. One of our favorite upgrades is the Boss 302-style grille.
Our '13 and '14 Boss 302 Grille Kit includes the grille, the fog light block-offs, and the emblem. This grille can also be modified to leave out the fog light block-offs by removing the tab, and you can use your factory fog lights.
The Ford Racing Boss 302S-style grille takes the factory Boss 302 grille and adds wire mesh to the fog light openings for all you track guys that need the utmost in cooling efficiency. It also includes the emblem. Both grilles are direct-fit upgrades for '13 and '14 GTs, as well as being direct replacements for '13 and '14 Boss 302s.
Installation can be done with the bumper cover in place. But trust me, it does make it a little bit easier if you go ahead and pull the bumper cover off. And the installation can be completed in less than an hour in your driveway with hand tools.
Go on over to latemodelrestoration.com and check out more exterior appearance upgrades for your Mustang.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
My install was completed with the bumper cover on. I started with the removal of the upper cover by pulling the 8 push pins then set them aside for reinstall. Second was using 2" blue painters tape around the grille opening as not to damage the paint, I found that the complete grille assembly can be gently but firmly pulled out. Next I used the push pin removal tool to release the inner grille starting on one end. Third Item was using a razor to remove the fog light tangs flush. cleaned all the areas before reinstall and push the new grille into the surround. be sure to push the area on the fog light upper brow into the surround. Reinstall by checking surround tabs are started and slowly push back into place. I used an iso pad to clean the mold release from the Tri bar install area. Pull the backing from the tri bar and press firmly. Removed tape and reinstall the upper cover and push pins.Now my GT that little difference from the rest ! Using FORD parts !! & Latemodel Restoration !!! Install took 1 hour. Just took my time and didn't rush to finish. Tony S.
Ford Motor Company Genuine Parts, Motorcraft® Parts and Ford and Motorcraft Remanufactured Parts are all excellent choices when it comes to performance, longevity and value for your Mustang or SVT Lightning. And they’re all backed by a Ford Motor Company limited parts warranty*, so you know their parts you use are going to perform like they should. Put the same parts on your Lighting & Mustang that came from the factory!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!