Your Mustang's seat belt plays a significant role in your driving safety. When you use a seatbelt, you're five times safer than when you don't wear it. Be sure your seat belt components are in perfect working order with these direct Ford replacements from LatemodelRestoration.com.
This is a replacement front right (passenger) side Ford seat belt assembly for your 2001-04 Mustang. It includes dark charcoal webbing, retractor assembly, and metal tounge (male end of clip). All of our seat belt assemblies meet or exceed OE Ford and DOT safety standards.
Safety should always be your first priority. LatemodelRestoration.com offers a wide array of safety parts and accessories because just like you, we want your Mustang to be fun AND safe. Whether cruising around town or just testing your skills on the local track, be sure to buckle up!
Do not under any circumstance remove the 3 pronged belt retainer (green part in item picture) from the seat belt webbing until you have the seat belt fully installed.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2015-03-27 A common failure on just about any New Edge Mustang Coupe is the front seat belt assembly. Overtime, the retractor loses tension in the spring mechanism... causing your seat belt to droop and dangle.
Your Mustang's seat belt plays a significant role in your driving safety. The Ford original seat belt assembly bolts to your factory locations, includes the retractor and tongue, as well as offers a perfect fit and finish into your New Edge.
Follow along in this video as we show you how to install the Ford original seat belt assembly on this 2001 Mustang GT. BUT, before we begin it is extremely important NOT to remove the 2 plastic stops on the seat belt webbing when you open the box!!!
Mustang Fitment ? 2001 (01), 2002 (02), 2003 (03), 2004 (04) Coupe ONLY
What's going on, everyone? Landon with Latemodelrestoration.com. Today I'm going to be taking a closer look at the Ford original seat belt assembly fitting all 2001 to 2004 Mustang Coupes.
A common failure on just about any New Edge Mustang Coupe is the front seat belt assembly. Over time, the retractor loses tension in the spring mechanism, causing your seat belt to droop and dangle.
Your Mustang's seat belt plays a significant role in driving safety. The Ford original seat belt assembly bolts to your factory locations, includes the retractor and tongue, as well as offers a perfect fit and finish into your New Edge.
Follow along as we show you how to install the Ford original seat belt assembly on this 2001 Mustang GT. But before we begin, it is extremely important not to remove the two plastic stops on the seat belt webbing when you open the box.
To begin installation, start by locating the two rear seat release tabs. Use a flat head screwdriver to depress the tab and lift the seat out of the car. Lower the rear seat backs to gain access to the three bolts that hold down the rear trim panel. Remove the three bolts with a ten millimeter socket, and then remove the panel from the car.
Starting on the driver's side, lift the plastic seat belt cover and remove the T40 Torx bolt. Also, remove the bottom T40 Torx bolt. Remove the two small push pin retainers from the B pillar door seal.
Next, remove the coat hanger with a small Phillip's head screwdriver. Pull down on the upper interior quarter panel, and remove it from the car. From inside of the trunk, remove the metal retaining clip from the interior quarter panel. Then remove the four plastic pushpins holding the lower interior quarter panel in place. Now you can gently pull up and get the scuff plate out of your way.
Finally, carefully pull out and up on the lower interior quarter panel. And then remove it from the car. Remove the seat belt retractor assembly from the car by removing the T40 Torx bolt. Carefully position your new retractor in the same location, and tighten down the bolt. Tighten down the upper seat belt mount. Remove the red stop and reposition on the outside of the upper seat belt mount.
Now you can remove the black stop and toss it aside. Carefully reinstall the lower interior quarter panel and remove the upper seat belt mount. Reinstall the upper interior quarter panel and coat hanger. Reinstall the rear trim panel. And then go back in with your rear seat. Reattach your scuff plate, and wrap the new belt into position. Next, install the lower seat belt mount.
If you need to replace the passenger side retractor, the steps are the exact same. Don't forget to double check everything. And you're all done.
The install is very straightforward. It should only take you about an hour to an hour and a half to complete.
Be sure to subscribe to our YouTube channel for more helpful videos on your New Edge Mustang by clicking the link below if you haven't already done so. And don't forget to pick up your Ford original seat belt assemblies from Latemodelrestoration.com.
Ford Motor Company Genuine Parts, Motorcraft® Parts and Ford and Motorcraft Remanufactured Parts are all excellent choices when it comes to performance, longevity and value for your Mustang or SVT Lightning. And they’re all backed by a Ford Motor Company limited parts warranty*, so you know their parts you use are going to perform like they should. Put the same parts on your Lighting & Mustang that came from the factory!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!