If you own a 1996-1998 Mustang GT, you are well aware of the horsepower deficiencies of the 4.6L 2V under the hood. Luckily, starting in 1999, Ford corrected some of those issues by way of "Power Improved" cylinder heads and intake manifold. Even better news is that these PI heads and intake are a nearly bolt on swap for your 1996-98 Mustang GT!
This kit includes virtually everything you need to make the swap to PI Heads from the heads and intake, all the way down to gaskets. The PI heads used in this kit come from FRPP and are the 2001-04 design. They come loaded with valves, springs & stock cams. The PI intake has the aluminum coolant crossover that must be drilled & tapped to accept the coolant temp sensor.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!