(4) Motor Mount To Engine Block Bolts With Washers
(2) Motor Mount To K- Member Nuts
Heavy Duty Motor Mount Kit
This is the perfect kit to upgrade your 1983-1995 Mustang to the desirable convertible motor mounts! These mounts offer better support and better construction than hard top mounts. Kit includes (1) driver side motor mount, (1) passenger motor mount, (4) ARP motor mount to engine block bolts with washers and (2) motor mount to k-member nuts. The 83-92 5.0L motor mount/engine mount was originally just a big block of rubber that usually delaminated from the metal plate and caused the engine to sit low often allowing the cooling fan to hit the fan shroud. In severe cases it could also cause the fan to hit the radiator as well as vibration issues due to the incorrect drive-line angle.
The convertible models used a different mount that had a smaller and higher durometer rubber insulator that was fully encapsulated in steel plating. This became the go-to motor mount for all 5.0 Mustang owners when replacement was needed and even Ford started using them in all 5.0L Mustang production starting in late 1992 and continuing through 1995.
Due to the mass-produced nature of this motor mount, some mild clearancing may be needed for proper fitment. This is the same mount you would get at your local auto parts store as there is only one aftermarket manufacturer, so the same note applies. The areas that may need to be trimmed are where the mount may come in contact with the block & not allow proper alignment of the bolt holes. The corner of the mount flange may potentially come in contact with the coolant drain plug boss which might keep it from fully bolting up. These areas may vary, so a fitment check will need to be done before installation. Clearancing can be performed with a hand file, die grinder, bench grinder or dremel tool. The amount of material that may need to be removed is small, so not much time/effort will be needed.
-Fits 1983-1995 Ford Mustang Coupe, Hatch or Convertible
See what our customers have to say about this product! Check out customer reviews.
After beating and grinding my way through other aftermarket Windsor mounts to make them fit, I was pleasantly surprised to see the sturdy, high grade finish on these. The ability to install them without a single hiccup or fitment issue made this by far the fastest and easiest engine install I've ever done.
Was this review helpful to you?
Install was smooth but engine vibrates worse than my old ones
Joe S. on
I bought these motors mounts couple months ago. Just got the car up and running again and by far the worst I ever seen my motor rock. Wish I went with poly mounts gonna change these out ASAP. Waste of money.
We apologize that you ran into problems with these mounts. Please expect a call from a customer service representative on the matter shortly.
Was this review helpful to you?
John kukic on
Bought and installed. The mounts came with two different finishes which doesn't concern me. But each was made in a different country which made me leary on them being correct. They do not specify in the description what brand they actually are. But they fit in and are better than my collapsed oem mounts.
50resto - Dedicated To The Preservation Of The Fox Body Mustang
50resto is your trusted source for 1979-93 Mustang Foxbody restoration products. Buy 50resto products from Latemodel Restoration Supply and receive the best value, quality and industry-leading customer service. Whether you need Fox Body Mustang weatherstrip, headlights, taillights, seals, body panels, hardware, door handles, trim parts, carpeting or upholstery, 50resto is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
I've done a complete engine swap from a 5.0 to a 5.8 Windsor motor that performs nicely. I've also upgraded the entire electrical system with MSD components as well . Future projects will include twi...