We recommend breaking this crate engine in properly. Latemodelrestoration.com will not be held accountable for any damages that may occur due to improper break-in methods. Normal break in conditions consist of 500 miles at normal operating conditions.
I am sorry, but we do not offer the 351 applications in a forged internals. I do have a option for the 302 in the forged if that will help you out any.
Answered by Jay W. from waco | Comment 0 0
It will use the 5.0 motor mounts and timing cover, but you will need a 351W specific oil pan and intake. Our SVE heads would be a good match to this engine along with a TFS stage 2 cam.
Answered by Jonathan M. from Hewitt | Comment 0 0
These economy short blocks use a stock production 351 block. I have seen them commonly make 600 flywheel horsepower. It will take some work to get 425 rwhp out of a stock cubic inch 351. It will take a good set of heads, matched camshaft and compression to get you there Naturally aspirated. Your best bet would be to settle on what heads you want to go with and contact comp cams and have them pick the right camshaft to meet your needs.
Answered by Scott G. from hewitt | Comment 0 0
Ford Mustang - 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93) - 1994 (94) - 1995 (95)