8.8" Rearend Pinion Flange Repair Sleeve
Got a leaking pinion seal in your 1986-2004 Mustang? This 8.8" rear end pinion flange repair sleeve can help make the fix! Over time, rubber seals can wear slight grooves into the pinion flange which can cause gear oil to leak from the pinion seal near the rear of the driveshaft. This Redi-sleeve repair kit easily installs onto your pinion seal shaft with the included installation tool to make for a smooth mating surface for your new seal. Simply slide the sleeve onto the pinion shaft and place the installation tool onto to sleeve. Slightly hammer the top of the tool to push the sleeve down to the bottom of the pinion flange. Once it has hit the bottom, you are ready to install the new seal and get your 8.8" rear end put back together. This kit includes 1 sleeve and 1 installation tool.
- Fits 1986-2004 Mustangs With 8.8" Rear Ends
As a deployed service member, there are not many avenues of contacting companies back home conveniently. Between the time difference and use of wifi or morale phones, it can be challenging. Luckily the team at LateModel Restoration emailed me back quickly and gave me everything that I needed for a smoothe purchase, and a few more that followed. They were quick in reply and quick to help me out and I have my parts on the way to my home now because of it. I will be shopping here primarily and I recommend it highly to fellow Mustang folks.
I've done a complete engine swap from a 5.0 to a 5.8 Windsor motor that performs nicely. I've also upgraded the entire electrical system with MSD components as well . Future projects will include twi...