If you have had your 1987 Fox Body Mustang GT repainted, or if the exterior emblems have just seen better days, this kit is for you! It includes Ford original front & rear Ford Oval Emblems & Ford Licensed 5.0 fender emblems.
The 5.0 fender Emblems & Rear Ford Oval Emblem feature peel-and-stick attachment using 3M double sided adhesive. The front Ford Oval re-uses the original attaching nuts.
Is it time to replace your 5.0 emblem on the side of your Fox Body Mustang? Maybe you have sent your Foxbody off to paint and you aren't sure exactly where the new 50 emblems should go back onto your Mustang. Most people may not realize that these were installed by hand on the Ford assembly line. Unlike later year model Mustangs, these did not use alignment tabs and holes in the fender. Thus making it hard to determine the exact spot these emblems show go back into.
Follow along with Jmac as he shows you how to remove and install new 5.0L Mustang Emblems back into their proper place. The emblem removal process will work on any emblem that is held on with 3M style adhesive tape.
These emblems will fit the following year model Mustang GT LX SVT Cobra: 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)
1979 to '93 Mustangs equipped with the five liter engine are also equipped with this chrome five liter fender emblem. Now, if yours looks a little bit like this, it's definitely in the wrong spot. But then again, who's to say what the right spot is? Because the factory really didn't have a template. They just kind of stuck it in a general direction.
But this one needs to be a little bit more centered, a little further up, and definitely more level. Removal of the emblem is pretty simple. Just take some masking tape, and tape around the emblem to protect the paint. Then you can use either fishing string or a putty knife to break the tape loose from the paint.
Once the emblem's out of the way, go ahead and remove your tape, clean up the entire area, and then use an eraser wheel to remove whatever tape residue is left.
Then you can use the template for locating the fender emblem. This can be downloaded off of latemodelrestoration.com's website. Peel and stick.
Now you want to repeat this same process for the other side. And man, that really made a good improvement on this '90 coupe.
Now to grab your set of chrome 5.0 emblems, hop on over to latemodelrestoration.com.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
50resto - Dedicated To The Preservation Of The Fox Body Mustang
50resto is your trusted source for 1979-93 Mustang Foxbody restoration products. Buy 50resto products from Latemodel Restoration Supply and receive the best value, quality and industry-leading customer service. Whether you need Fox Body Mustang weatherstrip, headlights, taillights, seals, body panels, hardware, door handles, trim parts, carpeting or upholstery, 50resto is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
I just gatta say i have ordered several things from interior kit to trim pieces to transmission and diff gears and install kit they are allways on the ball and helpfull over the phone both before and after the purchases....thank you for everything!!!!
'89 LX 5.0, 2 owner car, all stock except for exhaust. Flowmaster offroad H pipe, Flowmaster American Thunder exhaust kit. All new weather stripping, quarter window repair kit and various other parts ...