Includes Inner Belt Weatherstrip, Lower Carpet & Map Pockets
What's in the Box
(1) Driver Side Door Panel
(1) Passenger Side Door Panel
Deluxe Mustang Door Panels
This pair of fully assembled Mustang door panels includes new inner belt weatherstrips, door lock knob grommets, lower door carpet and map pockets. No assembly required, all you have to do is pull them out of the box and install them on your Mustang.
- 1985-86 Mustang door panel style
- Fits Mustang convertible
- For Mustangs with power windows only
This set of Mustang door panels ship with the material covering one side of the door panel without cut outs. The back side of the door panel board has perforated opening locations for such things as door handles, window cranks, electric windows, speaker covers, etc.
Chalk marks on the material face act as a guide where cuts are to be made for arm rests, door handles, etc. Once the material is cut all of the chalk marks can be removed with alcohol or soap and water. If you have a question about which openings to cut and which ones not to cut, please refer to your original door panel as a ready reference.
It is your responsibility to remove whatever perforated openings that are required for your Mustang. It is recommended to carefully use a single edge razor blade to remove perforated openings. Once the openings are cut out, the material should be cut to accommodate the part that needs to go into the opening.
This can be done by using a razor blade or razor knife to cut an "X" through the material in the center of the opening. Please be careful not to cut the "X" all the way to the edge of the opening in the board. It is suggested to leave 1/4" of material inside the opening so it looks clean when the material is folded back.
After the "X" cut is made you can fold back the material so you can install door handles, arm rests, etc. If desired, you can tape of glue the flaps of material to the backside of the board, but it is not required as once the hardware and door panel are installed, you will not be able to see the loose material.
If car is equipped with manual crank windows, hardtop door panels will need to be used.
While removing the Door Panels on your 87-93 Mustang is a fairly straightforward process, it may seem a bit daunting to the uninitiated. At some point in time, all Fox Mustang owners will be faced with removing their Door Panels to replace Door Lock Actuators, Power Window Motors, or even to just hang a new set of Doo... more
Just a quick note to say what great people (Eddie Davis) are at Latemodel Restoration. I ordered and bought a set of Track Pack Wheels for my 2014 Mustang GT.Their prices and service is the BEST in the MUSTANG INDUSTRY, not only the price and service but the honesty. The wheels came thru with the wrong center caps one call to Eddie Davis corrected the situation in one phone call and the next day I had the center caps (FORD RACING) the correct ones no BS, they just did the Right Thing,whereas in this Day and Age you don't here that often. LATEMODEL RESTORATION is the only place for your Mustangs parts and equipment, trust me try them and you will see what I mean!!