Made From 1/8" High Density Fiberboard (Hardboard)
Solid Vinyl Covering - No Cut Outs
What's in the Box
(1) Driver Side Door Panel
(1) Passenger Side Door Panel
Door panels for your Fox body Mustang are finally available. Kits include two door panels wrapped in vinyl material. To ease installation, don't forget to order our door panel installation kit.
Mustang Door Panel Construction
These door panels are made from 1/8" high-density-fiberboard (hardboard) covered with factory style vinyl with a layer of cotton padding and paper moisture barrier in between. The hardboard is precision cut for a perfect fit in your Mustang.
Optional Components Installation
The design of this door panel is such that non-required components can be installed AT WILL. For instance, if you don't want to install the worn out map pockets from your old door panels, you don't have to! The vinyl covering is solid, with no cut outs so leaving off the map pockets or even the door speakers is perfectly OK!
Are These Mustang Door Panels Right For You? Question 1: Does your Mustang have an existing set of door panels? If your Mustang does not already have door panels these door panels are NOT for you. Almost every piece of the old Mustang door panel with the exception of the board and the vinyl will need to be re-used. If your Mustang does not have door panels you should look into a set of our "deluxe" door panels.
Question 2: Do you consider yourself a do-it-yourselfer OR do you have a local upholstery shop that you can do the installation for you? When you purchase these door panels assembly IS required and if you don't feel comfortable doing the installation yourself you should find a local upholstery shop that can handle this type of work.
If you said yes to these two questions you are the perfect candidate for this set of Mustang door panels!
- Will not fit Mustangs with manual windows
- Does not include: speaker grilles, door belt weatherstrip, door handle bezels, or lock knob grommet
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!