Includes Inner Door Belt Weatherstrip, Speaker Grilles, Lower Door Carpet & Cloth Inserts
What's in the Box
(1) Driver Side Door Panel
(1) Passenger Side Door Panel
(24) Door Panel Clips
Deluxe Mustang Door Panels
This pair of fully assembled Mustang door panels includes new inner door belt weatherstrips, door lock knob grommets, speakers grilles, lower door carpet and cloth inserts. No assembly required, all you have to do is take them out of the box and install them on your Mustang using the included door panel clips.
- 87-89 style, but will also fit 90-93
- Fits Mustang hatchback and coupe
- For Mustangs with power windows only
- Fits 1987 & early 1988 Mustang Convertible & T-Top with the hardtop style window post mounted side mirror
Door Panels = Key Interior Component
As far as Mustang interiors go there are only a few components that you will see or touch on a regular basis: carpet, seats, dash/console, and door panels. Out of this list door panels get overlooked probably more than anything else, but when you consider how your Mustang's door panel affects your overall driving experience you start to wonder why. During normal driving your left arm will rest on the arm rest that is secured to the door panel. Not only is the arm rest a handy place to set your elbow, but it also houses your window and door lock switches considering that your Mustang has power windows and locks.
The door panel is not just there for convenience, it also serves an important purpose: blocking out excessive road noise that comes from the door cavity. Door cavities are a breeding ground for squeaks, rattles, knocks, and other annoying sounds. If your Mustang's door panel is ill fitting, not properly installed, damaged or missing these sounds will find their way into your interior and eventually drive you nuts! Do yourself a favor and pick up a set of these brand new, fully assembled, deluxe door panels. Install them with the brand new door panel clips (included) and drive your Mustang in peace! Your ears will thank you!
Follow along in this video as Jmac shows you how to remove your Fox Body Mustang panel panel. Removal of your Mustang Door panel takes little time and is needed to get your Project Fox Body Mustang interior looking great by removing those sagging map pockets and other worn door components.
Removing your Foxbody Mustang Door Panel is a necessity to gain access to window motors, door lock actuators, door speaker grilles, window guide bushings, moisture/vapor barrier, sound deadeners, or replacement map pockets. It also lets you gain access to the door speaker in your Fox Mustang for audio upgrades. If you need help replacing any of parts above be sure to check our line of 5.0Resto parts for your full door restoration project.
SPEAKER: We're going to show you how to remove your door panel on your '87 to '93 Mustang, , because you have to remove this panel to get to just about anything. There are door lock actuators, window motors, you name it. Really simple. You need a Phillips head screwdriver, a nut driver with a 3/8 socket, and a door panel removal tool, available off of our website.
Start by removing the Phillips head screw holding on the mirror hole cover. Then, remove the single Phillips head screw holding on the inner door handle bezel. And the Phillips head screw holding on the base of the speaker grille.
Now you've got two Phillips head screws, one at the front, and one at the back of your door armrest. Going ahead and remove those. Then grab you a small, flat-blade screwdriver, and you can remove your door armrest hole plugs. OK. Then you can grab your 3/8 socket and remove the two bolts that are remaining, holding on the arm rest.
Then you can lift up on the armrest, out, and pull it away from the door, and you've got two electrical connectors that you need to undo. And then you can move the arm rest out of the way. Grab your door panel removal tool and work your way around the perimeter of the door panel.
You've got 12 plastic clips that retain this poor panel to the door. Some of them may not be holding on anymore. Just remove the ones that are. And once all your clips are loose, you can lift up on the door panel, and pull it off of the car.
And now you have full access to everything inside the door that you're going to need to repair, or just to replace your panel.
For more interior restoration tips and parts, check out latemodelrestoration.com.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
The last part of my interior restoration was new door panels. My old pair was completely shot. These showed up in a few days and were really high quality. The vinyl was a perfect match, carpet was identical to the rear quarter trim and floor carpet I just purchased and the cloth insert was exact to the new seats. They installed in about an hour after I popped out the pre marked cut outs for the armrest and door latch. They look great and the speaker grill is also high quality. I highly recommend for any interior restoration.
This was my teenage dream car. I bought it as a daily driver to and from work but quickly got hooked on the project of making it an amazing ride. So far what I have done is an interior restoration, ad...