Due to a warehouse move all wheel shipments will be delayed until Monday 12/22.
Direct Replacement For OEM Window Regulator
OE Quality Replacement Part
What's in the Box
(1) RH Door Window Regulator
Direct Replacement Window Regulator
Are your S197 windows not rolling up or down like they use to? It may be time to replace your window regulator! This 2005-2014 Mustang RH door window regulator is the perfect replacement for a malfunctioning passenger's side window regulator. The window regulator mounts to the inside of your door to guide the windows up and down. The window motor mounts to the regulator to power the pivot points. When these pivot points become dried out or worn, they will cause slow window operations and could keep your windows from operating. Pick up this direct replacement today and prevent being stuck with your windows down!
Watch as we show you how to remove the door panels on your 2005-09 Mustang. Taking off the door panels is necessary to install new inner door handles, door lock actuators, inner door belt weatherstrip and speakers. Removing the door panels will take you less than 15 mins.
Removing the door panels on your 2005 to 2009 Mustang is a necessity when you're replacing the inner door belt weather strippings. We're simply trying to gain access to the internal components, so follow along in this video and let me show you just how easy it is to remove that door panel.
Start by taking a 7-millimeter nut driver and removing the eight screws around the perimeter of the door panel. Remove the mirror hole cover by gently pulling it away from the door. Disconnect the electrical connector on the mirror switch. Take a small screwdriver and remove the inner trim cover behind the door panel, then remove the T-30 Torx Bit screw located behind the cover.
Now remove the trim panel behind the door armrest with a flat-bade screwdriver. You can then remove the T-30 Torx Bit screw behind the cover. You can now remove the door lock and window switch assembly by gently pulling it away from the door panel. You will need to disconnect the wiring harness from the switch assembly before you can put it aside.
With the assembly out of the way, you can now remove the 7-millimeter nut located behind it. With this nut removed, you can now remove the door panel by simply lifting up on it and gently pulling it away from the door. Disconnect the door lock and speaker wiring harnesses from the back of the door panel.
Lastly, remove the door handle cable with a pair of pliers. Compress the back of the cable while pulling on the cable to remove it. For more S 197 tech videos, make sure you subscribe to our YouTube channel and head on over the LatemodelRestoration.com for all of your S197 Mustang performance and restoration needs.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
I've done the majority of my aftermarket mustang parts shopping at American muscle, recently finding out about this website I'd just like to say it is a great experience to shop here, the lay out is easy and simple to navigate, and you have thousands of parts that no other website has. The shipping is very fast and all te updates are great. I will be doin much more shopping with y'all, so thanks for being so badass haha