Don't deal with those droopy doors! Either from an accident or just constant use over the years, door hinges tend to wear out and droop. Replace those worn-out hinges with these new, factory replacements. Simply bolts in place of the factory hinge to restore the proper function of your door.
I first painted both hinges with glossy black duplicolor paint ahead of time. I replaced both the drivers and passenger side lower hinge. both doors would not stay open and just about cut off your shins if you weren't paying attention. I was able to replace both of them without removing the fender, I used painters tape to mark the hinge location on both the car and the door. I also used the tape to mark the door on the outside of the car in 4 locations, by just taping over the seam between the door and the car and cutting the tape with a razor blade. I unbolted the door using 2 floor jacks with towels folded over several times on them to keep from messing up the door and my 10 year old son to keep the door upright. I also put electrical tape on the extension to keep from messing up the paint on the fender. After the door was unbolted, I slid it back then unbolted the bottom hinge and replaced it.
Ford Motor Company Genuine Parts, Motorcraft® Parts and Ford and Motorcraft Remanufactured Parts are all excellent choices when it comes to performance, longevity and value for your Mustang or SVT Lightning. And they’re all backed by a Ford Motor Company limited parts warranty*, so you know their parts you use are going to perform like they should. Put the same parts on your Lighting & Mustang that came from the factory!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!