Chrome inside door handle bezels are now available from 50resto. Includes black inner cup to match factory equipment of your 1979-1993 Fox Body Mustang! Replace your original chrome bezels with these for a fresh new look or replace your black bezels to add some flash to your interior.
Follow along in this video as Jmac shows you how to remove your Fox Body Mustang panel panel. Removal of your Mustang Door panel takes little time and is needed to get your Project Fox Body Mustang interior looking great by removing those sagging map pockets and other worn door components.
Removing your Foxbody Mustang Door Panel is a necessity to gain access to window motors, door lock actuators, door speaker grilles, window guide bushings, moisture/vapor barrier, sound deadeners, or replacement map pockets. It also lets you gain access to the door speaker in your Fox Mustang for audio upgrades. If you need help replacing any of parts above be sure to check our line of 5.0Resto parts for your full door restoration project.
SPEAKER: We're going to show you how to remove your door panel on your '87 to '93 Mustang, , because you have to remove this panel to get to just about anything. There are door lock actuators, window motors, you name it. Really simple. You need a Phillips head screwdriver, a nut driver with a 3/8 socket, and a door panel removal tool, available off of our website.
Start by removing the Phillips head screw holding on the mirror hole cover. Then, remove the single Phillips head screw holding on the inner door handle bezel. And the Phillips head screw holding on the base of the speaker grille.
Now you've got two Phillips head screws, one at the front, and one at the back of your door armrest. Going ahead and remove those. Then grab you a small, flat-blade screwdriver, and you can remove your door armrest hole plugs. OK. Then you can grab your 3/8 socket and remove the two bolts that are remaining, holding on the arm rest.
Then you can lift up on the armrest, out, and pull it away from the door, and you've got two electrical connectors that you need to undo. And then you can move the arm rest out of the way. Grab your door panel removal tool and work your way around the perimeter of the door panel.
You've got 12 plastic clips that retain this poor panel to the door. Some of them may not be holding on anymore. Just remove the ones that are. And once all your clips are loose, you can lift up on the door panel, and pull it off of the car.
And now you have full access to everything inside the door that you're going to need to repair, or just to replace your panel.
For more interior restoration tips and parts, check out latemodelrestoration.com.
Product: Mustang Black Inner Door Handle Bezel Kit Brand: 5.0 Resto Fits: Mustang LX, GT, Coupe, Hatch and Convertible Year Models: 1979 (79) 1980 (80) 1981 (81) 1982 (82) 1983 (83) 1984 (84) 1985 (85) 1986 (86) -1987 (87) 1988 (88) 1989 (89) 1990 (90) 1991 (91) 1992 (92) 1993 (93) LRS Part #: LRS-22634K
Mustang Door handle bezels often break from being over tightened. These OEM Style Black inside door handle bezels are now available from 50resto. Includes black inner cup to match factory equipment of your 1979-1993 Fox Body Mustang! Replace your original black bezels with these for a fresh new look.
Features & Benefits
Direct Replacement For OEM Door Handle Bezels
OEM Style Construction
Correct Attaching Hardware Is Included
JONATHAN MCDONALD: Hey everybody, JMAC here. And I'm going to show you how to remove the inner door handle on your Fox Mustang. Entirely simple, but you do have to remove your door panel to get to it. For more information on that, check out our YouTube channel or latemodelrestoration.com. Now, you want to grab your Phillips head screwdriver and remove the single Phillips head screw holding on the door handle to the door. Flat blade screwdriver and pry down on the little tabs at the front, and give it a sharp little hit, and it should break free of the door.
Now you can pull it out, lift up, and slide it off the door latch rod. Grab your new door handle, on the back side you've got the same type of attachment. You want to go ahead and slide it on to the latch rod down and go ahead and engage it in the door, line up all the tabs, slide it back, and one sharp, little hit should engage it. And then you can put your screw right back in. And that is how simple it is to change out your inner door handle, slap your door panel back on, and you're good to go. You can open your door again. For more interior restoration videos and tech tips, check out latemodelrestoration.com.
when i got the bezel kit i was excited to give my mustang a better looking interior. the passenger side bezel had a scuff on the edge, but i was not to worried about it because when i installed the bezel the scuff was on the bottom edge and was just about out of site. The rubber gasket that came with the driver side door did not fit properly and because of that i was getting about 1/8' gap between the door and the top of the door bezel. I had to shave down the rubber gasket to make a better fit, but there is still a bit of a gap.
Was this review helpful to you?
Ronald D. Moore on
These bezels look much more attractive than the stock ones. Thank You.
50resto - Dedicated To The Preservation Of The Fox Body Mustang
50resto is your trusted source for 1979-93 Mustang Foxbody restoration products. Buy 50resto products from Latemodel Restoration Supply and receive the best value, quality and industry-leading customer service. Whether you need Fox Body Mustang weatherstrip, headlights, taillights, seals, body panels, hardware, door handles, trim parts, carpeting or upholstery, 50resto is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
This is by far the best experience I have ever had buying parts for my mustang. There is no other place for me, then LatemodelResto. I have bought multiple parts over multiple orders and have had nothing but a smile from ear to ear. Aaron Westerman was my contact person from LatemodelResto. I could not ask for a better customer service representative than him! He went above and beyond multiple times for me and made my experience with Latemodel the reason I keep coming back. LatemodelResto will continue being my #1 stop for my Mustang parts.