Can you please give me the bushing dimensions. Include both the inside dimensions (where the guide bar runs through) and the lip on the outside where they snap into the bracket. Trying to determine what other models these might fit. Thanks!
Asked by Daniel M. from Amarillo | Comment 0 0
Inside opening is 1/2" x 6/8". Outside rim is 1" 1/8 x 7/8". The clips are 6/8" apart on the long sides and exactly 1" on the short sides. I hope that answers your question.
Answered by Tyson C. from Plainview | 4 Comments 0 0
I have a 93 Mustang convertible and need to replace the front window bushings. It was recommend that I order the quarter window guides but they look the same as the front window guides. Although I do need to replace the quarters soon. But I really need to replace the fronts as I have my interior tore apart now....help.
Asked by Brian J. from Liberty | Comment 0 0
I thought the quarter window guide bushing were the same as the front as well. However they are NOT. For the convertible, the front guide bushings are a different size. If you try to use the quarter window bushings you'll find they are too big. Also! The convertible doors on my 91 only required ONE bushing each. You may check that before purchasing too many.
Answered by Tyson C. from Plainview | Comment 0 0
Is the guide rod removed on a convertible the same way as it shows in the video, which was on a coupe. My guide rod has a felt guide pad at the top that makes it look impossible to spread the door wide enough to remove the rod through the opening as shown in the video.
Asked by Van P. from Crossville | Comment 0 0
Ford Mustang - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)