Restores Proper Function To Sprung Or Broken Handles
Foam Seal For Door Panel Opening
What's in the Box
(1) Passenger Inner Door Handle Assembly
The 1979-93 Fox Body Mustangs are getting to the age where Interior parts start to break from age and use. A perfect example is the inner door handles. LatemodelRestoration.com has a wide variety of Replacement interior parts to help with your Fox Mustang Restoration. These 83-93 Mustang Interior Door handles replace your sprung or broken original handle and are simple to replace. Once you remove the door panel to gain access to them, remove a screw and slide it back from the door. Release the latch rod and it's loose. Putting it back together is just as simple.
Product: 1983-93 Mustang Inner Door Handles Brand: 5.0 Resto Fits: Mustang LX, GT, Coupe, Hatch and Convertible Year Models: 1983 (83) 1984 (84) 1985 (85) 1986 (86) 1987 (87) 1988 (88) 1989 (89) 1990 (90) 1991 (91) 1992 (92) 1993 (93) LRS Part #: LRS-22634KB
The 1979-93 Fox Body Mustangs are getting to the age where Interior parts start to break from age and use. A perfect example are the inner door handles. LatemodelRestoration.com has a wide variety of interior parts to help with your Project Fox Body Mustang. These 83-93 Mustang Interior Door handles replace your sprung or broken original handle. Installation is a breeze. Follow along as Jmac shows you how to remove and install inner door handles on your Foxbody Mustang.
JONATHAN MCDONALD: Hey everybody, JMAC here. And I'm going to show you how to remove the inner door handle on your Fox Mustang. Entirely simple, but you do have to remove your door panel to get to it. For more information on that, check out our YouTube channel or latemodelrestoration.com. Now, you want to grab your Phillips head screwdriver and remove the single Phillips head screw holding on the door handle to the door. Flat blade screwdriver and pry down on the little tabs at the front, and give it a sharp little hit, and it should break free of the door.
Now you can pull it out, lift up, and slide it off the door latch rod. Grab your new door handle, on the back side you've got the same type of attachment. You want to go ahead and slide it on to the latch rod down and go ahead and engage it in the door, line up all the tabs, slide it back, and one sharp, little hit should engage it. And then you can put your screw right back in. And that is how simple it is to change out your inner door handle, slap your door panel back on, and you're good to go. You can open your door again. For more interior restoration videos and tech tips, check out latemodelrestoration.com.
Follow along in this video as Jmac shows you how to remove your Fox Body Mustang panel panel. Removal of your Mustang Door panel takes little time and is needed to get your Project Fox Body Mustang interior looking great by removing those sagging map pockets and other worn door components.
Removing your Foxbody Mustang Door Panel is a necessity to gain access to window motors, door lock actuators, door speaker grilles, window guide bushings, moisture/vapor barrier, sound deadeners, or replacement map pockets. It also lets you gain access to the door speaker in your Fox Mustang for audio upgrades. If you need help replacing any of parts above be sure to check our line of 5.0Resto parts for your full door restoration project.
SPEAKER: We're going to show you how to remove your door panel on your '87 to '93 Mustang, , because you have to remove this panel to get to just about anything. There are door lock actuators, window motors, you name it. Really simple. You need a Phillips head screwdriver, a nut driver with a 3/8 socket, and a door panel removal tool, available off of our website.
Start by removing the Phillips head screw holding on the mirror hole cover. Then, remove the single Phillips head screw holding on the inner door handle bezel. And the Phillips head screw holding on the base of the speaker grille.
Now you've got two Phillips head screws, one at the front, and one at the back of your door armrest. Going ahead and remove those. Then grab you a small, flat-blade screwdriver, and you can remove your door armrest hole plugs. OK. Then you can grab your 3/8 socket and remove the two bolts that are remaining, holding on the arm rest.
Then you can lift up on the armrest, out, and pull it away from the door, and you've got two electrical connectors that you need to undo. And then you can move the arm rest out of the way. Grab your door panel removal tool and work your way around the perimeter of the door panel.
You've got 12 plastic clips that retain this poor panel to the door. Some of them may not be holding on anymore. Just remove the ones that are. And once all your clips are loose, you can lift up on the door panel, and pull it off of the car.
And now you have full access to everything inside the door that you're going to need to repair, or just to replace your panel.
For more interior restoration tips and parts, check out latemodelrestoration.com.