i was curious of you I bought these adapter brackets, and used 94 gt calipers, pads and rotors. am I going to have to switch the axles because I know the center hole on the 94 mustangs is different compared to the fox body center hole. and is the offset on the 94 rotors going to be okay for my wheels. is it going to make the wheels stick out or stick in to far.
Asked by daniel h. from stow | Comment 0 0
You will need to either swap the axles to something such as part number LRS-4234K-SN that already has the correct flange, or if you have a machine shop local to you, they can machine the flange down to clear the rotors. In either scenario, the factory track width is retained, so the offset should be fine with your wheel assuming you are wanting to run a wheel intended for a 94-04 car.
Answered by Karson S. from Hewitt | Comment 0 0
Ford Mustang - 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)