1979-93 Ford Mustang Heater Core Kit w/ Factory A/C - Fox Body

Mustang Heater Core Kit w/ Factory A/C (79-93)


Details   |  Description   |  Videos   |  Customer Photos   |  Reviews   |   Community Q&A
  • Mustang Heater Core Kit w/ Factory A/C (79-93)
Mustang Heater Core Kit w/ Factory A/C (79-93)
  • Mustang Heater Core Kit w/ Factory A/C (79-93)
  • Mustang Heater Core Kit w/ Factory A/C (79-93) - Mustang Heater Core Kit w/ Factory A/C (79-93)

This after-market Heater Core is a direct replacement for your 1979-1993 Mustang.

Item #LRS-18476A

Everyday Low Price: $36.99

In Stock
Ships tomorrow!


Add to cart


Benefits

  • Replaces Original Heater Core
  • Lighter Weight Than Original

Features

  • Correct Heater Hose Fitting Sizes

What's in the Box

  • (1) Heater Core For Factory A/C Mustangs
  • (1) Roll Foam Sealant Tape For Perimeter Surface

Product Description

Direct Replacement Mustang Heater Core
If your 1979-1993 Mustang heater isn't working it may be time to replace your heater core. A faulty heater core can also result in a coolant leak onto your floorboard which causes steamed up windshields, strong coolant smells in your car, and a constant wet floor on your passenger side floor board. This direct replacement heater core will solve these problems and get your heater working like new again. Pick on up at LatemodelRestoration.com and follow along with one of our installation videos or tech articles to help you with your installation!

Notes
-The Heater Cores are specific to Factory A/C and Non A/C Cars.


Product Videos

Mustang Heater Core Installation (79-93 Fox Body)

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!


Customer Photos (2)



Product Reviews (7)


5.0
out of 5 stars
5 stars
7 reviews
5 stars    7
4 stars    0
3 stars    0
2 stars    0
1 star    0

100%
OF CUSTOMERS
RECOMMEND THIS PRODUCT
7 of 7 REVIEWS
RECOMMEND THIS PRODUCT
7 of 7 REVIEWS


5 Stars   No more steamy windshield!
By on 2/11/2014
Quality product works just as good as the factory but much lighter since it is aluminum instead of copper. Not a bad install if you aren't afraid of removing the dash as the rest of the process with the air box is pretty simple. Worth the work for sure!



Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Good Quality!
By on 4/6/2015
This heater Core was installed on a 89 Mustang Convertible 5.0 GT. The factory one was not bad, but felt since it was 25 years old, it would be just a very short time before coolant would be in the passenger floor board. This Core comes with foam tape to wrap the edges. Installation will require dash removal, so make sure you watch the videos here several times before actually starting the process. I would like to recommend that a restrictor plug be installed in the inlet hose to reduce surging of coolant and placing undo stress to your heater core. This will extend its life and reduce or eliminate the noise associated with coolant flow. This item can be found here on Late Model Restorations site. The inlet side is the larger diameter connection and the outlet is the smaller. you will know which hose to use since it is almost impossible to install in the smaller one. This product appears to be of very good quality.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Dry floorboards are nice
By on 8/16/2014
When my car caught the dreaded soggy passenger-side carpet syndrome I knew I was in for a fun project. The how-to video on the Youtube page has a big help.

Here's a tip: after taking out the old core, clean as much of the old sealant out as you can. As I understand, it can put a squeeze on the new core and lead to future failure. I was "lucky" enough to be fixing my A/C at the same time so I could just pull the whole HVAC box out.

The job isn't terribly difficult, but definitely requires time and patience. Best of luck.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   great fit.
By on 11/29/2014
So far so good on heater core. Takes time to install but great video lmr on install. Take your time and work hard for a all day job on install but save money. Good time too remove carpet also and shampoo. Thanks lmr

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Perfect Replacement!
By on 3/31/2014
Image uploaded by scott g. Took about 4 1/2 hours. I replaced the one in my 85 with this unit and it has worked perfectly for 2 winters so it was time to do the 88's I had by-passed.
Top quality part!


Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   heater core kit
By on 3/13/2015
excelent fit and function. thanks for great products and service

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Ships fast.
By on 6/30/2014
Arrived a day sooner than expected,

Yes, I would recommend this item to a friend!


Was this review helpful to you?

Vehicle Applications

Ford Mustang - 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)


Look for Similar Items by Category

1979-1993 Mustang Parts » 1979-1993 Mustang Engine Parts » 1979-1993 Mustang HVAC Parts
Ford Mustang Parts » Mustang Engine & Underhood » Mustang HVAC » Mustang Heater Cores » 1979-93 Mustang Heater Cores
Ford Mustang Parts » Mustang Engine & Underhood » Mustang HVAC » Mustang Heater Cores

Products by Vehicle