Back of emblem has alignment tabs for a perfect fit
OEM Ford Emblem
Original for 1979-82 Mustang LX
3 1/4" Diameter
Peel and stick with double sided tape
Chrome with red, white and blue
What's in the Box
(1) Hood Emblem
A factory OEM Ford emblem for your 1979-82 Mustang LX. Not Correct for 1979-82 GT but is the only one available at this time. Even if you don't have one of these cars, many people simply remove the mounting tabs from the back and apply to any flat surface including fenders, and trunk deck lids to add a personal touch. All emblems are sold as each unless otherwise noted.
Emblem Alignment Tabs
This emblem features plastic alignment tabs molded into the backside. These tabs match up with the holes drilled into your Mustang's fenders so that it will be perfectly aligned upon installation. However, if you prefer to use this emblem in a different location they can be easily cut off with a pair of cutting pliers or ground off with a grinder, or Dremel tool.
Quick Emblem Removal
Many people heat the orignal Mustang emblem badge with a hair dryer to loosen the double sided tape. Fishing line or dental floss held in each hand can be pulled behind the emblem to finish seperating it from the Mustang body. Once started, the emblem badge can be removed by placing a thin flat object between emblem and body being careful not to scratch paint. Apply light steady pressure to break the seal of the double sided tape and gently pry and pull until the emblem is free of the body.
Ford Motor Company Genuine Parts, Motorcraft® Parts and Ford and Motorcraft Remanufactured Parts are all excellent choices when it comes to performance, longevity and value for your Mustang or SVT Lightning. And they’re all backed by a Ford Motor Company limited parts warranty*, so you know their parts you use are going to perform like they should. Put the same parts on your Lighting & Mustang that came from the factory!
My name is Bryan Bayer and this is my 1988 Mustang GT. Currently going through the process of smoothing the engine bay and building a new motor. Motor is a stock short block 302 with GT40P heads and t...