Back of emblem has adhesive installed for easy Installation
Exact Reproduction of OEM Ford Emblem
Original for 1965-66 Mustangs
Dimensions 3 3/4"h x 3 3/4"w
Peel and stick with double sided tape
Chrome with red, white and blue
What's in the Box
(1) LH Pony Tri-Bar Emblem
(1) RH Pony Tri-Bar Emblem
Original equipment on 1965-66 Mustangs these are now available with double sided adhesive and will apply to any flat surface. Looks great on fenders but must be slightly curved to fit. Similar to the 1984 1/2 Anniversary car.
Quick Emblem Removal
Many people heat the orignal Mustang emblem badge with a hair dryer to loosen the double sided tape. Fishing line or dental floss held in each hand can be pulled behind the emblem to finish seperating it from the Mustang body. Once started, the emblem badge can be removed by placing a thin flat object between emblem and body being careful not to scratch paint. Apply light steady pressure to break the seal of the double sided tape and gently pry and pull until the emblem is free of the body.
Quality is good, colors are good. Mounting was very easy. Installed two of them on a 2007 v6 convertible. Dresses it up nicely and adds a little nostalgia to the car.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Very high quality but watch out for FLAT mounting surface!
Kelvin G. on
I bought these emblems to install on a 1992 LX but when I received them and went to install them I realized they are flat and not contoured to the curve in the fender body panel, making them unable to be installed properly. Looking back at the description, I see it specifies that they mount to any FLAT surface and must be bent to fit a curved surface but there is no indication how to do this. They are a very small yet high quality piece of metal so bending them will be very difficult without completely wrecking the specially cut doubled sided mounting tape on the back or the plastic tri-bar Mustang inserts on the front. I tried bending them with my hands but to no avail. I just wish that the FLAT mounting surface requirement was more clear and obvious as the title leads you to think they are only meant for mounting on a fender where there is obviously going to be a curve, or that they gave you a way to bend them to the correct curve without damaging them since they are such nice emblems. All in all I'm glad I bought them as they are very well made and will find a use for them some where.
50resto - Dedicated To The Preservation Of The Fox Body Mustang
50resto is your trusted source for 1979-93 Mustang Foxbody restoration products. Buy 50resto products from Latemodel Restoration Supply and receive the best value, quality and industry-leading customer service. Whether you need Fox Body Mustang weatherstrip, headlights, taillights, seals, body panels, hardware, door handles, trim parts, carpeting or upholstery, 50resto is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
I have been ordering items from Latemodel Restoration for many years. I've found them to be exceptionally professional, timely with order processing and shipping correct items ordered. I've never received an incorrect item on an order.
'89 LX 5.0, 2 owner car, all stock except for exhaust. Flowmaster offroad H pipe, Flowmaster American Thunder exhaust kit. All new weather stripping, quarter window repair kit and various other parts ...