This is the great looking 35th anniversary Mustang fender emblem used on 1999 Mustangs. The outer surface of the emblem has a chrome finish while the 35th Anniversary text is inset with black paint. The Pony stripes are inset with the classic red, white and blue Mustang colors. It attaches with double sided adhesive, so you can use it anywhere or on any year Mustang you choose!
Emblem Alignment Tabs
This emblem features plastic alignment tabs molded into the backside. These tabs match up with the holes drilled into your Mustang's fenders so that it will be perfectly aligned upon installation. However, if you prefer to use this emblem in a different location they can be easily cut off with a pair of cutting pliers or ground off with a grinder, or Dremel tool.
Quick Emblem Removal
Many people heat the orignal Mustang emblem badge with a hair dryer to loosen the double sided tape. Fishing line or dental floss held in each hand can be pulled behind the emblem to finish seperating it from the Mustang body. Once started, the emblem badge can be removed by placing a thin flat object between emblem and body being careful not to scratch paint. Apply light steady pressure to break the seal of the double sided tape and gently pry and pull until the emblem is free of the body.
Ford Motor Company Genuine Parts, Motorcraft® Parts and Ford and Motorcraft Remanufactured Parts are all excellent choices when it comes to performance, longevity and value for your Mustang or SVT Lightning. And they’re all backed by a Ford Motor Company limited parts warranty*, so you know their parts you use are going to perform like they should. Put the same parts on your Lighting & Mustang that came from the factory!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!