Your factory fog light bezels can easily become cracked from road debris or missing all together! Restore your 2003-04 Cobra front bumper to its factory look with these OE Ford replacement fog light bezels.
These are the factory black plastic fog light bezels which are located on the lower front bumper and surround the factory fog lights. Also a must have when converting your 1999-04 Mustang GT or V6 bumper to a 2003-04 Cobra style front bumper!
Since the release of the 03-04 Terminator SVT Cobra, changing Mustangs (V6, GT, Bullitt and Mach 1) over to Cobra front ends has been a popular conversion. The 03-04 Cobra featured a unique front bumper cover, hood and fog light assembly. The fog light assemblies featured a fog light bezel that had a circular opening for a Fog Light and a brake cooling duct. If you want to convert your Mustang over to a 03-04 Cobra front end or if you just need to replace your worn-out Cobra fog lights, we have you covered with our full line of Cobra parts.
*** Note our fog lights are covered by our no hassle warranty ***
Fits Mustang SVT Cobra: 2003 (03) - 2004 (04)
Broken or damaged fog lights are very common on all year model Mustangs, such as the case on this '03 Cobra behind us. The previous owner decided they wanted to tint them black, did a very poor job of doing so. Now, they look completely like crap.
Luckily, for '03, '04 Cobra owners, we have everything you need to get your car looking as good as possible. Now, if you have a '99 to '04 V6 or GT and you've upgraded to a '03, '04 Cobra bumper cover, this kit applies to you as well, because we include the needed connectors and attaching hardware to attach your fog lights to the bumper cover.
Now, the fog lights include new bulbs, so you don't have to worry about purchasing those separately. And the install is really easy, can be done in your driveway in little to no time at all. Now, the bezels are side-specific and are marked on the back with an R or an L. Now, the R goes to the passenger side, L to the driver side.
Fog lights are universal. They'll go on either side. Now, to get started with the removal, unplug the electrical connector from the fog light bulb. Remove the four retaining screws that hold the fog light to the bumper cover. Then remove the two screws that hold the fog light bezel to the bumper cover.
Unsnap the bezel, and remove it from the car. Now, you can go back in with your new parts. Before I get this install finished up, check out just how bad off these original lights were. Installation is the exact opposite of removal. Go ahead and snap everything back together, and check for operation.
You could probably tell it that we have a huge improvement that just took place on this '03 Cobra. Now, for more Mustang lighting options, check out latemodelrestoration.com.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Ordered this as part of a set to replace my 03 Cobra bezels. Installed and they look as good as new. Latemodel Restoration shipped quick and the prices were very reasonable. Thanks for a good experience.
Ford Motor Company Genuine Parts, Motorcraft® Parts and Ford and Motorcraft Remanufactured Parts are all excellent choices when it comes to performance, longevity and value for your Mustang or SVT Lightning. And they’re all backed by a Ford Motor Company limited parts warranty*, so you know their parts you use are going to perform like they should. Put the same parts on your Lighting & Mustang that came from the factory!
I've done the majority of my aftermarket mustang parts shopping at American muscle, recently finding out about this website I'd just like to say it is a great experience to shop here, the lay out is easy and simple to navigate, and you have thousands of parts that no other website has. The shipping is very fast and all te updates are great. I will be doin much more shopping with y'all, so thanks for being so badass haha