Our Mustang GT reproduction replacement fog light assemblies include clear lens, bulb, housing, pigtail, and retaining nut! Simply bolt it up and plug it in! Great replacement for your factory yellowed, foggy, or broken fog light assemblies! The bulbs are replaceable & are a standard H3 bulb.
These fog light assemblies are reproduction, not Ford.
Not only does it look shabby running around town with faded and dingy fog lights but it's also a safety hazard. You would be amazed how big of a difference new fog lights will make in the night time and fog visibility department!
Product: 1987-93 Mustang GT Fog Light Kit Brand: 5.0 Resto Fits: Mustang GT, Cobra, Hatch and Convertible Year Models: 1987 (87) 1988 (88) 1989 (89) 1990 (90) 1991 (91) 1992 (92) 1993 (93) LRS Part #: LRS-15200A-K
In this video, Jmac will show you how to replace and install new Mustang GT Fog Lights. Broken and faded GT fog lights are a common problem on Fox Body Mustangs. Installation will take you less than an hour and can be done with simple hand tools. These 5.0Resto Mustang Fog Lights are also back by our NO HASSLE WARRANTY! Pick up a set today and give the exterior of your Project Fox Body Mustang a complete overhaul.
Our replacement Mustang GT and Cobra fog light assembly pair includes clear lenses, bulbs, housings, pigtails, and retaining nuts! Simply bolt them up and plug them in! Great replacement for your factory yellowed, foggy, or broken fog light assemblies! The bulbs are replaceable & are a standard H3 bulb.
SPEAKER: If you own an '87 to '93 Mustang GT or a '93 Cobra, it's likely that you have had, or currently have, the problem of a broken fog light. Now, these fog lights, they catch road debris or rocks, and the lens breaks, and then you lose your light. Just doesn't look good going down the road. Now, we've got covered with brand new replacement 5.0 Resto fog light lenses that have the correct glass lens, has the new nuts, the new mounting stud, and new mounting bracket, and even features the correct factory electrical connector for plug and play installation.
Now, to remove your old one if it's broken, you want to put on a glove, because that glass is sharp and you may cut yourself. Now, the factory nut is a 9/16. Go ahead and remove that nut. Then you can unplug your electrical connector, grab hold of the light, and pull it out through the front of the bumper cover.
Now, the new nut on the new fog light is actually a different size. You want to grab you a 17 millimeter. To reinstall, you want to make sure that the bracket stays on the stud. Then go ahead and feed the electrical connector through the oval hole in the fog light bracket. Then go ahead and slide your fog light into place, and get the stud lined up in its hole, making sure that adjustment bracket stays in position.
Now you can go ahead and slide your nut on. Just kind of run it down by hand, and position the light as close as you think you can get it, and then tighten up the nut. All right. Tighten that nut down, and go ahead and plug your electrical connector back in.
All right. And then take a look at your finished product, and as long as everything is centered up then you're done.
Now, for more lighting options for your Fox Mustang, check out latemodelrestoration.com.
In this video Jmac will walk you through how to change the fog light bulb on your 87-93 Mustang GT. If you are one of the luck ones who only have a bad bulb and not a broken fog light, then this will show you how to replace the bad fog light bulb. If you are wanting to upgrade to HID or ultra white fog light bulb this will also help you with your install.
Don't forget that if you do need to replace your Mustang Fog Light we have plenty of different options available for your Project Fox Body Mustang. These options range from smoke (tinted), ultra clear and more. Remember that all LatemodelRestoration.com lights are back with a NO HASSLE warranty so you can rest assured that you are getting a quality replacement for that broken or faded headlight.
JONATHAN MCDONALD: Sometimes the fog light isn't broken, and you don't have to replace the whole assembly. It's just the bulb. Replacing the bulb is extremely easy. And this process will apply to '87 and '93 Mustang and '99, 2000 Lightning.
Step one, remove the fog light from the vehicle. Then grab the metal tab at the top. Lift it up. Pull the fog light lens forward and then up and out.
Unplug the single-spayed connector with the white braided wire. Move the two wire clips, and pull the retainer out of the way. Then lift the old bulb out of the assembly.
Slide your new bulb in. Rotate the retainer into place. Lock the two tabs in. Plug this single-spayed connector. Slide your lens back into the housing, and press it until the top tab clips into place.
Reinstall your fog light and test for operation. And there you have it. It took you about 30 seconds, once you had the fog light laying on the table. Now, to pick up your OE replacement, our super-white Xenon bulbs, check out latemodelrestoration.com
50resto - Dedicated To The Preservation Of The Fox Body Mustang
50resto is your trusted source for 1979-93 Mustang Foxbody restoration products. Buy 50resto products from Latemodel Restoration Supply and receive the best value, quality and industry-leading customer service. Whether you need Fox Body Mustang weatherstrip, headlights, taillights, seals, body panels, hardware, door handles, trim parts, carpeting or upholstery, 50resto is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
E-commerce in today's world is all about the customer experience, period. Take it from a guy who works in this space for a very large retailer currently on the IT Supply Chain side. Every time I order from LateModel I'm always impress at how quickly they process orders. For those that work in this field in always challenging as volumes shift. Thanks for making my project a reality......