Are your 1987-1993 Fox Body Mustang window switch covers faded, worn, or scratched? Restore your interior by replacing them today with our new window switch bezel kit. These replacement bezels feature bold white text that will give your Foxbody factory new looks. Each kit comes with 1 right hand bezel, 1 left hand bezel, and 2 attaching screws to help you complete your interior restoration.
1987-93 FORD MUSTANG WINDOW SWITCH & SWITCH COVER KIT COUPE HATCHBACK Brand: 5.0Resto Part #: LRS-14527E-K Fits: Ford Mustang GT, LX & SVT Cobra Coupe and Hatchback Years: 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)
Replace those worn, broken or missing window switch covers in your Fox Body Mustang. If you also have bad switches, then this kit was built for you!! It includes driver and passenger side window switch covers, two door lock switches, three power window switches and switch cover screws.
This kit is a great way to bring your foxbody mustang door back to life and fix those broken switches that are keeping your power door locks or windows from functioning properly. Be sure to check out our switch install video: http://youtu.be/dhUaritp56A
Broken and worn power door switch covers and switches are commonplace on '87 and '93 Fox Mustangs. Don't waste all of your time trying to piece everything together. Grab one of our all- inclusive, 5.0Resto power switch cover and switch kits. It fits '87 and '93 Mustangs except for convertibles.
The kit includes right- hand and left- hand switch covers, power door lock switches, power window switches, as well as attaching screws. Let's say you only need one or two of these pieces. Well, we offer all of these components individually on our site. Browse on over to LatemodelRestoration.com, and check out our huge selection of Fox Mustang parts. And while you're there, check out our helpful tech articles and how-to videos.
Follow along in this video as Jmac shows you how to remove your Fox Body Mustang panel panel. Removal of your Mustang Door panel takes little time and is needed to get your Project Fox Body Mustang interior looking great by removing those sagging map pockets and other worn door components.
Removing your Foxbody Mustang Door Panel is a necessity to gain access to window motors, door lock actuators, door speaker grilles, window guide bushings, moisture/vapor barrier, sound deadeners, or replacement map pockets. It also lets you gain access to the door speaker in your Fox Mustang for audio upgrades. If you need help replacing any of parts above be sure to check our line of 5.0Resto parts for your full door restoration project.
SPEAKER: We're going to show you how to remove your door panel on your '87 to '93 Mustang, , because you have to remove this panel to get to just about anything. There are door lock actuators, window motors, you name it. Really simple. You need a Phillips head screwdriver, a nut driver with a 3/8 socket, and a door panel removal tool, available off of our website.
Start by removing the Phillips head screw holding on the mirror hole cover. Then, remove the single Phillips head screw holding on the inner door handle bezel. And the Phillips head screw holding on the base of the speaker grille.
Now you've got two Phillips head screws, one at the front, and one at the back of your door armrest. Going ahead and remove those. Then grab you a small, flat-blade screwdriver, and you can remove your door armrest hole plugs. OK. Then you can grab your 3/8 socket and remove the two bolts that are remaining, holding on the arm rest.
Then you can lift up on the armrest, out, and pull it away from the door, and you've got two electrical connectors that you need to undo. And then you can move the arm rest out of the way. Grab your door panel removal tool and work your way around the perimeter of the door panel.
You've got 12 plastic clips that retain this poor panel to the door. Some of them may not be holding on anymore. Just remove the ones that are. And once all your clips are loose, you can lift up on the door panel, and pull it off of the car.
And now you have full access to everything inside the door that you're going to need to repair, or just to replace your panel.
For more interior restoration tips and parts, check out latemodelrestoration.com.
I put these in last weekend. It only took about 10 minutes each. I replaced the switches at the same time. The covers themselves are identical however I would reuse the old back metal clips they seemed to fit in better.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Great fit! Quality product
Sal T. on
Very good quality product, I'm re-doing my whole interior and it's little touches like these bezels that make a huge difference!
I have been ordering items from Latemodel Restoration for many years. I've found them to be exceptionally professional, timely with order processing and shipping correct items ordered. I've never received an incorrect item on an order.