The average 87-93 Fox Body Mustang is in need of new window switch covers. Over time, they tend to crack, fade, or become scratched. These new covers are a direct replacement for your OEM parts to help restore your Foxbody interior. This kit includes new window switches and new door lock switches to replace worn or malfunctioning switches. Pick up a kit today and get your restoration project closer to completion!
1987-93 FORD MUSTANG WINDOW SWITCH & SWITCH COVER KIT COUPE HATCHBACK Brand: 5.0Resto Part #: LRS-14527E-K Fits: Ford Mustang GT, LX & SVT Cobra Coupe and Hatchback Years: 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)
Replace those worn, broken or missing window switch covers in your Fox Body Mustang. If you also have bad switches, then this kit was built for you!! It includes driver and passenger side window switch covers, two door lock switches, three power window switches and switch cover screws.
This kit is a great way to bring your foxbody mustang door back to life and fix those broken switches that are keeping your power door locks or windows from functioning properly. Be sure to check out our switch install video: http://youtu.be/dhUaritp56A
Broken and worn power door switch covers and switches are commonplace on '87 and '93 Fox Mustangs. Don't waste all of your time trying to piece everything together. Grab one of our all- inclusive, 5.0Resto power switch cover and switch kits. It fits '87 and '93 Mustangs except for convertibles.
The kit includes right- hand and left- hand switch covers, power door lock switches, power window switches, as well as attaching screws. Let's say you only need one or two of these pieces. Well, we offer all of these components individually on our site. Browse on over to LatemodelRestoration.com, and check out our huge selection of Fox Mustang parts. And while you're there, check out our helpful tech articles and how-to videos.
Follow along in this video as Jmac shows you how to remove your Fox Body Mustang panel panel. Removal of your Mustang Door panel takes little time and is needed to get your Project Fox Body Mustang interior looking great by removing those sagging map pockets and other worn door components.
Removing your Foxbody Mustang Door Panel is a necessity to gain access to window motors, door lock actuators, door speaker grilles, window guide bushings, moisture/vapor barrier, sound deadeners, or replacement map pockets. It also lets you gain access to the door speaker in your Fox Mustang for audio upgrades. If you need help replacing any of parts above be sure to check our line of 5.0Resto parts for your full door restoration project.
SPEAKER: We're going to show you how to remove your door panel on your '87 to '93 Mustang, , because you have to remove this panel to get to just about anything. There are door lock actuators, window motors, you name it. Really simple. You need a Phillips head screwdriver, a nut driver with a 3/8 socket, and a door panel removal tool, available off of our website.
Start by removing the Phillips head screw holding on the mirror hole cover. Then, remove the single Phillips head screw holding on the inner door handle bezel. And the Phillips head screw holding on the base of the speaker grille.
Now you've got two Phillips head screws, one at the front, and one at the back of your door armrest. Going ahead and remove those. Then grab you a small, flat-blade screwdriver, and you can remove your door armrest hole plugs. OK. Then you can grab your 3/8 socket and remove the two bolts that are remaining, holding on the arm rest.
Then you can lift up on the armrest, out, and pull it away from the door, and you've got two electrical connectors that you need to undo. And then you can move the arm rest out of the way. Grab your door panel removal tool and work your way around the perimeter of the door panel.
You've got 12 plastic clips that retain this poor panel to the door. Some of them may not be holding on anymore. Just remove the ones that are. And once all your clips are loose, you can lift up on the door panel, and pull it off of the car.
And now you have full access to everything inside the door that you're going to need to repair, or just to replace your panel.
For more interior restoration tips and parts, check out latemodelrestoration.com.
87-93 Mustang Door Lock Switches tend to go out due to age and constant use. LRS carries a full line of new replacement Switches for this exact reason. These are factory type replacement door lock switches for your power window equipped 87-93 Mustang.
87-93 Mustang Power Window Switches tend to go out due to age and constant use. LRS carries a full line of new replacement Switches for this exact reason. These are the factory window switches for your power equipped Mustang. Factory black plastic buttons included and will fit both Drivers and passenger sides.
* * * NOTE: This switch is also the replacement for 87-93 convertible 1/4 window switches!* * *
J MAC: Hey, everyone. I'm J Mac. A very common question that we get here at latemodelrestoration.com is how do you replace your power window switches or power door locks switches on an '87 and '93 Mustang. That answer is very simple. All you need is a Phillips head screwdriver and small flat blade screwdriver, and you've got a single Phillips head screw on your switch plate.
You can pop it out of the way. And then grab that small flat blade, and you can carefully pry up on your switch plate to remove it out of the arm rest. Now on the back of your switch plate, you've got two Phillips head screws holding on the switch panel. We'll get those out of the way. And you can access your switches.
Now you may have to pull on your wiring harness a little bit to get this much slack. Sometimes the wiring harnesses talked a little bit further down into the door. Now on your switches, they all have locating tabs. So you can know exactly how they go back in. And if you take that small flat blade screwdriver, you can simply pop it out of the switch plate.
Now our 50resto replacement power window switches and power door locks switches, they are direct replacements and are exact reproductions of the original, even featuring the correct markings on the switch face. And the install the same way as they remove. You just pop it in the place.
Now you screw it all back together. And you've got functioning switches again. For more interior restoration tips and videos, check out latemodelrestoration.com.
Although I had to wait months for this item to be in the store, it only took three days to arrive at my door, this item fit right the first time no messing around. I must say, I have ordered approx. 20 items, fast delivery and great parts. Thanks
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Pat Bingert on
Part fit great looks new and really complimented my interior
I just gatta say i have ordered several things from interior kit to trim pieces to transmission and diff gears and install kit they are allways on the ball and helpfull over the phone both before and after the purchases....thank you for everything!!!!
This was my teenage dream car. I bought it as a daily driver to and from work but quickly got hooked on the project of making it an amazing ride. So far what I have done is an interior restoration, ad...