These high quality 1985-86 SVO Mustang tail light lenses are molded from the original Ford tooling, easy to install, and a budget friendly alternative to replacing the whole taillight assembly. They also will fit 1993 Mustang Cobra. These lenses feature charcoal horizontal lines.
If you have wrecked your fox body Mustang and busted the taillight lenses, or you are just wanting to freshen up your Mustang's rear end, there is no better way to go! All 1983-93 tail light lenses are interchangeable, which allows you to personalize your fox body Mustang. This is the driver and passenger side lenses only! No hardware or housings are included.
Not only does it look shabby running around town with faded and dingy taillight lenses but it's also a safety hazard. You would be amazed how big of a difference new taillight lenses will make in the night time visibility department! The more people can see you braking clearly, the less chance of unwanted accidents and fender benders!
The kit installs very well. Having the extra clip is useful because the manufacturing housing from ford doesn't match the new lens contour. They're all like that so the extra clip pulls the lens in correctly. Charcoal color for the lens painting and tape stripe is a little lighter from the factory shade. I also resprayed the silver areas of my housing while the old lens was off to brighten the lights up. Lastly to be correct you need to trim back the tape stripe back from the side marker light.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Unhappy With Quality
Daniel Shady on
I bought the tail light lenses to replace the faded lenses i had before. These lenses are produced by Daniel Carpenter Mustang Reproductions so I expected them to be of good quality. When these arrived I immediately noticed a few things wrong with them. The color of the paint is incorrect. The color should be SEM #39163 Medium Smoke. When you lay the lens up to the housing, the light gray stands out very drastically. The paint is also not very durable. The stripe material is also incorrect. The stripe originally was rolled or screen printed on. On these reproductions, the stripe is tape. Also, the lower middle stripe extends to far. The stripe should stop right before it meets the small box visible in the reflector. Overall, I am not pleased with the product.
When it comes to high quality restoration parts for your Mustang, what better than ones manufactured from the OE Ford tooling! These reproduction Mustang parts are cut, molded, stamped, and processed from the exact same specifications as their factory counterparts. Be assured when purchasing Original Ford Tooling parts, the fit and finish are second to none and are the perfect answer for hard-to-find or N/A Mustang parts from Ford. Shop LatemodelRestoration.com to get OE tail lights, grilles, bumper covers, fan shrouds, body parts, interior components, scuff plates, and cowl grilles.
I live in Canada which makes getting parts more difficult due to shipping and availability. I decided to try late model restoration out as they are Canada shipping friendly. The order went smoothly and the parts arrived, and were exactly as i expected. Then a problem arose with one item. Now being in Canada this usually makes this a very painful experience to deal with due to the cost of shipping products back and forth across the border. Most of the time it is just easier and cheaper to just order a new one and cut the loses. Not in this case. I sent out an email with the issue and by the time I went outside to take a picture i already had a response. A new product was shipped out immediately. I could not believe how good the customer service was. This will be where i will get what i need for now on. Anyone can sell a product but it is nice to have a company stand behind what they sell. Thanks again.
these are mine and my Dads 2015 GT's. My Dad owns 2 other Mustangs a 1990 notch back and a 88 GT convertible. he has owned 8 Mustangs over time and over 230 cars in his lifetime. from Ford Model A's...