Headlights take a beating from road debris and other traffic in front of you. Freshen up your 05-09 Mustang with a set of new Headlights from LatemodelRestoration.com. These are a direct boltin for the originals and will have you seeing clearly at night and looking great during the day! Depo replacement headlight assembly for 2005-2006-2007-2008-2009 Mustang GT & V6 without HID.
1 year warranty on all of the lights we sell
Although the manufacturer does not always warranty their products, we do! If you consider buying lights from Latemodel Restoration Supply you can be assured that we will stand behind them! We only use the best possible manufacturers when selecting our products. We have heard of other companies telling their customers to bake their lights in an oven or run silicone around the seams to fix or prevent leak issues. Not here! If for some reason there is a defective light assembly we will simply replace it, no questions asked, for 1 year from the date of purchase. Not only do we like to offer our customers the best value, we back it up with the best service!
Video: Ford Mustang Bumper Removal How-To (2005-09)
Published on 2014-10-07
Are you wondering how to remove the front bumper cover on your 2005-09 Mustang? If so, we walk you through step by step in our front bumper removal video.
If you plan on installing new headlights, fog lights, or bolt-on on a turbo kit to your 2005 to 2009 Mustang, all of those require you to remove your front bumper cover. Today, on this '07 Mustang, I'm going to show you just how easy it is to remove your front bumper cover.
With your hood open, start by removing the six plastic push pins from the radiator cover. Slide a flat head screwdriver underneath the recessed edge, and lift up. If that doesn't work, carefully remove the push pins with needle-nose pliers. Once removed, lift up the radiator cover and set it aside.
Next, remove the two 10-millimeter bolts that hold the bumper pillar in place. Pull the pillar up and toward the front of the car to release the top of the bumper. Next, remove the three Phillips head screws that attach the splash shield to the bumper.
Remove the push pin from the splash shield. Carefully pull the splash shield back, and remove the two bolts that hold the bumper to the bumper bracket. Do the same for the other side.
Then, pull down on the bumper to free it from the bracket. Once free, carefully move the bumper back to remove the park light and fog light connections. Remove the bumper and set it aside.
With simple hand tools and about 20 to 30 minutes of your time, you can remove your front bumper cover right there at home. For more Mustang how-tos, subscribe to our YouTube channel or check us out on the web at latemodelrestoration.com.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Working in a customer service oriented job I can truly appreciate minute by minute notifications and incredible customer service. I am building my seventh fox and have dealt with every known distributor on the planet and LMR is by far the most efficient and thorough company I have dealt with.(twisted wedge top end kit and supporting equipment project starting this week)
I have this beautiful 06 G.T. That I bought recently! The hard work has already been done, and all I have to do is enjoy it! The 4.6 has been rebuilt from the ground up! With Pistons, cams, intake, in...