Adds FR500 Inspired Racing Looks To Your 1994-04 Mustang
FR500 Wheel Styling
1 Piece Cast Aluminum Construction
Machined Outer Lip
Weight 20 lbs
What's in the Box
(1) 17x9 FR500 Style Wheel
Diameter 17"Width 9"Lugs 5Offset +24 mm.Backspacing 5.85 in.Bolt Circle 4.5 in.
FR500 Race Inspired Styling For Your 1994-04 Mustang
These great looking Mustang wheels are a must have for any 1994-04 Mustang! These wheels are 17x9's that come finished in anthracite gray with a machined outer lip and are designed to be a direct bolt on for 1994-04 Mustang applications. SVE logo center cap included.
* * * Note: Will fit Fox Body applications when a 94-04 5 lug front conversion is used.* * *
I bought these rims a few years ago love the look they brought to my fox so I finally bought another to have as a full size spare
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Put these wheels on my 91 notch and they DID fit with stock fox spindles and fox style 5 lug rotors!! I have since installed sn95 spindles and cobra 13" brakes but customer service told me they would ONLY fit with sn95 spindles/rotors and that was incorrect !!!! Love the wheels
Upload your own picture of the Mustang Fr500 Wheel - 17X9 Anthracite (94-04)
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com® permission to use it in future advertisements and promotions.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Circle
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
Wheel Lug Pattern
Wheel lugs or bolt pattern is merely the number of bolts or lugs on the wheel. As the bolts will be evenly spaced, the number determines the bolt pattern. For example, most U.S. passenger cars have 5 bolts while compact models sometimes have only 4 and pick-up trucks can have as many as 6 or 8.
E-commerce in today's world is all about the customer experience, period. Take it from a guy who works in this space for a very large retailer currently on the IT Supply Chain side. Every time I order from LateModel I'm always impress at how quickly they process orders. For those that work in this field in always challenging as volumes shift. Thanks for making my project a reality......