Diameter 17"Width 10"Lugs 5Offset +20 mm.Backspacing 6.3 in.Bolt Circle 4.5 in.
Saleen SC Styling For Your Fox Body
This awesome new wheel is very similar to the Saleen SC style wheel and is sure to make your steed look like the performance machine it is! LRS is proud to offer the popular design of the Saleen SC wheel that any Mustang fan can enjoy. These wheels are 17x10's that are a deep dish design and come finished in silver with a machined Outer lip. Now you can get that great deep dish look you've been after on the back of your 1994-2004 Mustang.
10" Wheels can not be used for Front Wheel applications due to clearance issues!
- Includes center cap.
- OE style center caps will not fit.
I bought the rims about 2 months ago. I did the five lug conversion and lots of suspension work. Was able to fit 275/45/17 on the back no issues no hammering just removed rear quad shock. Would recommend these rims to anyone looking for a all around sharp rim but not to flashy.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Vinnie A. on
They make my fox stand out. Different front Bullitts or cobra r's
Upload your own picture of the Mustang Deep Dish SC Wheel - 17X10 Silver (94-04)
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com® permission to use it in future advertisements and promotions.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Circle
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
Wheel Lug Pattern
Wheel lugs or bolt pattern is merely the number of bolts or lugs on the wheel. As the bolts will be evenly spaced, the number determines the bolt pattern. For example, most U.S. passenger cars have 5 bolts while compact models sometimes have only 4 and pick-up trucks can have as many as 6 or 8.