Adds 1993 Cobra Styling To Your 5 lug 1979-93 Mustang!
Chrome Plated Finish
1 Piece Cast Aluminum Construction
Includes Center Cap
Passenger Side Fitment Only
What's in the Box
(1) RH 17X8.5 '93 Cobra Style Wheel
Diameter 17"Width 8.5"Lugs 5Offset +30 mm.Backspacing 5.9 in.Bolt Circle 4.5 in.
5 Lug Cobra Wheels
Give your 5 lug 1987-1993 Mustang the same great looks as the 1993 Cobra with these 5 lug 93 Cobra wheels. These silver wheels are a great upgrade for your 5 lug swapped Fox Body to retain the famous SVT look. This 17x8.5 RH 93 Cobra wheel is designed to fit on the driver side to keep the "fan blades" facing the correct way. They feature a chrome plated finish and also include a new center cap.
Upload your own picture of the Mustang 5 Lug 93 Cobra Wheel RH - 17x8.5 Silver (94-04)
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com® permission to use it in future advertisements and promotions.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Circle
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
Wheel Lug Pattern
Wheel lugs or bolt pattern is merely the number of bolts or lugs on the wheel. As the bolts will be evenly spaced, the number determines the bolt pattern. For example, most U.S. passenger cars have 5 bolts while compact models sometimes have only 4 and pick-up trucks can have as many as 6 or 8.
I've done the majority of my aftermarket mustang parts shopping at American muscle, recently finding out about this website I'd just like to say it is a great experience to shop here, the lay out is easy and simple to navigate, and you have thousands of parts that no other website has. The shipping is very fast and all te updates are great. I will be doin much more shopping with y'all, so thanks for being so badass haha
My name is Bryan Bayer and this is my 1988 Mustang GT. Currently going through the process of smoothing the engine bay and building a new motor. Motor is a stock short block 302 with GT40P heads and t...