THis 2005-2009 Mustang underhood engine harness for manual transmission is the perfect kit for your 3v motor swap. Featuring factory connections and pre-loomed wires, you no longer have to worry about ugly stray wires in your engine bay. This kit is designed for simplifying 05-09 3 valve motors swaps with a manual transmission. It can be set up for factory returnless fuel system or an aftermarket fuel pump with return line. Comes with everything to connect all factory sensors on the engine and transmission to your factory ECM plus wiring for the fuel pump, electric fan and diagnostic port. ECM programming required
This kit is designed to fit 4.6L 3 valve manual transmission Mustangs.
Mustang Complete Wiring Harnesses
Mustang Complete Wiring Harnesses
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2013-08-01 Whether you are looking for engine harness, fuel harnesses or just replacement oxygen sensor harnesses, 5.0Resto has you covered with a full selection of harnesses to ensure you don't spend all your time patching up a worn factory harness.
0:00:01 - 0:00:09 No matter what wiring project you have going on with your mustang, we have you covered with everything you need to get the job done right.
0:00:09 - 0:00:19 From complete engine conversion harnesses to factory correct restoration harnesses to the simplest of replacement connector pigtails, LatemodelRestoration.com has exactly what you need
What computer is this harness set up to run with? The 05 and 06 computer or the 07 and up computer? I already have a 05 computer and I would rather not have to buy another one. Asked by matthew k.from hull | Comment00
Best Answer: You will be fine with the 05 PCM. This is designed to work with the manual transmission PCM's from 05-09 3 valve cars. Answered by Karson S.from Hewitt | Comment00
SVE, or Special Vehicle Equipment, is your trusted source for 1979-93 Mustang Foxbody, 1994-98 Mustang SN95, 1999-04 Mustang New Edge, or 2005-present Mustang S197 performance and styling products. Buy SVE products from Latemodel Restoration Supply and receive the best value and quality, with industry-leading customer service. Whether you need Mustang wheels, Mach1 chin spoilers, control arms, subframe connectors, clutches, lowering springs, cold air intake kits, or big brake kits, SVE is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!