Don't want to drill holes in your 2005-2009 Ford Mustang GT500 for the front license plate? Get one of these detachable Sto N Sho front license plate brackets to easily mount your plate with no drilling required. These brackets bolt to the bottom of your Mustang for a quick and easy installation. Once mounted, simply pull the release pin to remove your plate and slide it back on when you are ready to reinstall. These brackets are perfect for keeping your car legal in towns that require front license plates.
Video: Mustang Detachable License Plate Installation - Sto N Sho (2013-14 GT/V6)
Published on 2013-10-22
Thanks to the Sto N Sho Detachable License Plate Brackets you can now simply remove your front license plate at a car show or cruise and best of all you don't have to drill holes in your front bumper cover. Installation is super easy and can be done in your driveway with simple hand tools. Add a removable front license plate to your S197 Mustang with the help Sto N Sho license plate brackets and LatemodelRestoration.com
Watch the installation video to see how to install one on your 2013-14 Mustang GT/V6. Same basic installation procedures are followed on all Sto N Sho brackets!
If you're like most Mustang enthusiasts, drilling holes in your front bumper cover just to install a license plate makes you cringe. Luckily, you don't have to do that anymore with the Stow N Go license plate frames.
They install easily underneath the front bumper cover of '05 to present Mustangs, and remove easily whenever you're at the car show, or whenever you just don't want that plate hanging out on the front.
Installation is really easy, as they include the needed installation instructions and hardware. Let me show you just how quickly you can get it done.
Start by removing the needed screws from underneath the bumper cover. Grab your mounting plate and supplied hardware and spacers. And install as directed. Slide your license plate frame into place.
Once installed, removal and installation of your license plate couldn't be any easier. They even include new hardware for your license plate. If you're not viewing this video on latemodelrestoration.com, be sure to click below for more information on this, and other problem solving products for your Mustang.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Very good quality and easy to read instructions, all in all good product. That said, install was a bit off. On my 2009 GT500, the splitter was in the way of the two rods to go in the tube (I ordered the GT500 bracket). Solution was putting extra ¼ inch. spacers on the front bolts under the splitter, and it fit just right.
Working in a customer service oriented job I can truly appreciate minute by minute notifications and incredible customer service. I am building my seventh fox and have dealt with every known distributor on the planet and LMR is by far the most efficient and thorough company I have dealt with.(twisted wedge top end kit and supporting equipment project starting this week)
I have this beautiful 06 G.T. That I bought recently! The hard work has already been done, and all I have to do is enjoy it! The 4.6 has been rebuilt from the ground up! With Pistons, cams, intake, in...