All Necessary Tubing, Couplers, Hardware & Associated Components for Installation
Single 70mm Turbo Kit
The On 3 Performance Turbo Kit for 2005-2009 Mustang GT 4.0L features a single 70mm Turbo with an Intercooler. This kit is capable of 400 to 700 horsepower (with proper supporting modifications)! The kit utilizes the factory exhaust manifolds and all tubing is 304 stainless steel. Boost is controlled by a 38mm Wastegate and pressure relief is handled by a 50mm Blow-off Valve. All needed hoses, lines, couplers, clamps, brackets, and hardware are included.
Bolt On Installation
While this kit is designed to be a bolt on, it is not a direct fit. Some modifications will be required! Such as cutting and clearancing to fit the intercooler and tubing, minor dimpling of the tubing to clear chassis components, tapping an oil return in the oil pan, etc. You will need to upgrade your fuel system; a high flow fuel pump, injectors and MAF will be required. Custom Tuning will be required! The power steering reservoir and front sway bar need to be relocated using the supplied brackets. Requires an oil filter relocation kit!
What is a Turbocharger?
A Turbocharger, or Turbo, is powered by your engines exhaust flow. Exhaust from the engine spins the Turbine which is connected to the compressor. The compressor draws in filtered ambient air, compresses it and feeds it to the engine. The amount of pressure above atmospheric pressure is referred to as boost. Turbo systems are generally referred to as being very efficient power producers and offer stock like driveability with significant power increase potential.
On3 Performance offers affordable, high quality turbocharger kits for all latemodel Mustangs. Each single and twin turbo kit is specifically designed to fit perfectly in your Foxbody, SN95, New Edge, and S197 Mustangs. These power adders can boost your 4.6L or 5.0L motor to over 100+ additional horsepower. Featuring an simple bolt on installation, you can get the edge over your competition in one weekend! Shop On3 Performance turbo kits at LatemodelRestoration.com.
Products by Vehicle
Upload a Picture
Upload your own picture of the Mustang On3 Performance Turbo Kit (05-09) 4.0
Please make sure to hold your device horzonally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com permission to use it in future advertisements and promotions.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!
2007- Cervini ram air, 70mm throttle body,MSD fuel mgmt.,Cervini dual side exhaust, BAMA tuner,245 35 17 tires,Bullitt wheels, EIBACH suspension, and many interior and exterior upgrades. Built with au...