Eliminates Cutting Of Factory Harness To Hook Up Radio
Has Provisions for Standard Radio or CD Player
Included Utility Compartment Below The Radio
Splice In Harness Adapts After-Market Deck To A Plug & Play Setup For Your Factory Harness
In The Box
(1) Radio Trim Bezel
(1) Radio Face Trim Plate
(4) Retainer Screws
(2) Splice In Radio Harness' That Make Your New Deck Plug & Play
Let's face it, some people don't do the best jobs of installing radios. They cut, trim, drill, and hack wiring when it really isn't necessary. If your Mustang Radio Area has seen better days, you can make life easier with this kit. This kit covers the complete face where the radio is placed so if your console has been cut or mangled this will give it a face lift. Radio Panel is held into place by 4 screws that screw into your console and use it as a mounting base. Kit Includes plastic panels and corresponding hardware.
Kit incudes the bezel to mount the radio as well as the radio wiring to install your aftermarket radio. Features a small storage compartment under the head unit. Some drilling of the factory console is required.
I bought my Stang about 8 years, it has been sitting for about 3 years because it was stolen. When it was recovered it was missing a lot of interior parts, leaking oil, tranny problems, and electrical...