Speaker Perforations and Defrost Vents Are Molded In
What's in the Box
(1) Replacement Dash Pad
Over the years Time and Climate take their toll on factory dash pads. Constant exposure to sun caused them to dry out, become discolored and eventually crack.
This new Replacement Dash pad fits 1979-1986 Mustang and 1979-1986 Mercury Capri. This Mustang & Capri replacement Dash Pad is molded urethane and features the speaker perforations and defrost vents. This new replacement Mustang Dash Pad is pre-molded in Dark Gray. This dash pad is reproduction quality & differs in construction from the original.
Order a replacement Dash Pad for your 1979-1986 Mustang or 1979-1986 Mercury Capri. Correct for 1984-1986 Exc. SVO. SVO will need to be painted to match.
Mounting holes must be drilled by the customer as factory production tolerances vary so widely that they really need to be drilled for the specific car.
Very pleased with fit and finish. I did have to drill two holes, one on each side of the dash pad these holes are in factory pad. These two mounting spots are behind the outer gauge bezel. A great product....
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Fit, but I expected better quality
Sal E. on
The color was pretty close, but the overall feel of it was rubbery. A lot of the speaker holes and mounting holes were not drilled all the way through. There was also some extra material around the edges of the mold and on the left side dash mounting tabs that I had to trim off. I got it all to line up, but it wasn't easy. Also the defrost area on the left was not supported well and was collapsing a little so I had to stuff foam in there to get it level.
I'm glad something like this exists for us early 5.0 fox guys, but for 200 dollars I expected better quality and something a little closer to a bolt on fit. I recommend this only to those who don't mind a lot of tweaking to fit.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!