Upgrading the shifter on your 03-04 Mustang Cobra or T-56 Equipped Mustang can result in increased gear noise from the shifter. The solution? A Silicone Shifter & Handle Gasket to ease installation and reduce noise. Pre Cut to seal the shifter base to the transmission and fit between the shifter handle, these gaskets are 1/16th" thick and are reusable. Adding these to your shifter will reduce interior noise while maintaining positive shifter feel making gear changes. Pick up a set today!
**Note if your gaskets are deforming when tightened or pushing out then you are over tightening the shifter bolts, torque is 11-15 Ft lbs**
Mustang Shifter Gaskets
Mustang Shifter Gaskets
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Looking for a great way to reduce interior noise on your Mustang's factor or short throw shifter? Check out the silicone shifter and handle gaskets at LatemodelRestoration.com. These gaskets eliminate the need for messy RTV to be applied during shifter installs and best of all the are reusable! The area made out of 1/16th inch thick silicone for leak free design that will help eliminate harmonics from your drive-train. That mean less noise coming from your shifter!!
These are available for the following transmissions:
JONATHAN MCDONALD: If you have an aftermarket shifter on your manual transmission Mustang, then you've likely noticed the added noise because of that solid shifter base. The reason is harmonics travel through aluminum very easily. One way to remedy this is with our high-temp silicone shifter gasket set.
These are great for two reasons. One being, they add in the layer of insulation in between that aluminum shifter base and the transmission housing as well as the shifter handle and the shifter base. The other thing is, you don't have to mess with that tube of silicone whenever you're installing your shifter on your Mustang.
Like I said, these are made out of high-temp silicone. And they are reusable. So anytime you have to pull your shifter off, you don't have to worry about getting a new gasket.
Our shifter gasket sets are available for T5 and T45 transmissions. For the Tremec 3550, an old-school TKO. For the TKO 500 and 600. Finally, the Tremec T56. Each shifter gasket set includes a shifter base gasket and a shifter handle gasket. To quiet down your Mustang shifter, head on over to latemodelrestoration.com and pick up your silicone shifter gasket set today.
This is by far the best experience I have ever had buying parts for my mustang. There is no other place for me, then LatemodelResto. I have bought multiple parts over multiple orders and have had nothing but a smile from ear to ear. Aaron Westerman was my contact person from LatemodelResto. I could not ask for a better customer service representative than him! He went above and beyond multiple times for me and made my experience with Latemodel the reason I keep coming back. LatemodelResto will continue being my #1 stop for my Mustang parts.