Powered by Mustang Enthusiasts - Call Now (866) 507-3786

1999-04 Ford Mustang Cowl Vent Cover - New Edge


Overview   |  Benefits   |  Features   |  In the Box   |  Description   |  Videos   |  Reviews
Mustang Cowl Vent Cover (99-04)
Easy install and a fraction of the cost of an OE Ford original. Perfect for your daily driver or race car!

Item# LRS-02228CR

Everyday Low Price: $139.99

In Stock!  




Benefits

  • One Piece Design Like OEM
  • Includes hood hinge seals

Features

  • Fits 1999-2004 Mustang
  • High Quality Replacement Panel
  • Must re-use original metal spring clips from original cowl grille

What's in the Box

  • (1) Cowl Vent Cover

Product Description

This cowl vent cover is made from durable plastic construction with rubber hood hinge seals already installed! This quality Wiper Cover is perfect for your daily driver or race car and is a direct replacement for the Original. If you need a cowl vent grill for your 1999-04 Mustang GT or V6, this cowl vent grille was made just for you! You must re-use your metal spring clips off the factory cowl grille for proper installation.

Product Videos

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!


Customer Reviews

4.5 stars
4.4 out of 5 stars - based on 9 reviews

  Not fit very well
By on 2/20/2014
Did not fit flush against w/shield. Did not have rubber piece along top of cover like factory one. Not near as happy with this as I've been with other stuff I've purchased from you.
From LatemodelRestoration.com: The LRS-02228CR does come with the rubber windshield seal as well as the rubber hood hinge seals, just like factory.
Was this review helpful to you?

  Looks good.
By on 3/7/2014
I was hesitant on not getting the OEM part but this part was fine, be careful removing the factory cowl panel as the clips that hold it in will almost certainty break and must be reused and are impossible to find, just remove it slowly. If you lose them go to a junk yard and try again.
From LatemodelRestoration.com: We have the correct hardware kit under part # LRS-N805229S-K!
Yes, I would recommend this item to a friend!


Was this review helpful to you?

  Was easier to install than I thought.
By on 5/27/2014
I recently had my Mustang repainted and a new front glass installed since it was cracked. I noticed the cowl panel was cracked when I got my car back after six weeks in paint shop and nobody will take responsibility so I needed a cost effective replacement. The repo one from latemodel restoration was the solution. I would recommend to get the hardware kit as well because the original ones will break and fall apart when removing the old one. I also ordered the trim black paint and refinished the wiper arms since I had to take them off to replace the cowl anyway. Now my car looks new again with a new cowl and repainted wiper arms to go with the repainted exterior.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  worked
By on 6/23/2014
It looks good and was made well. i had a little trouble on each end with the rubber strip wanting to not lay flat but i think it was an issue with my car. It is highly advised to order all the replacement clips as my old one's were not reusable.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  Sent Back
By on 3/31/2014
Both ends of the grille were separating from the seal. Had to return the item.

Was this review helpful to you?

  Perfect fit
By on 5/12/2014
This part broke on my mustang over three years ago and has been driving me crazy since. Finally got a chance to purchase it and replace it. Fits perfectly and makes my mustang look like new again.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  Good Fit
By on 3/24/2014
I needed to replace the cowl vent on my 2000 Mustang GT, the original was cracked in four different locations. The replacement part is a perfect fit, and looks like the original.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  Great service and great fit. Win win situation
By on 4/9/2014
Bought the cowl panel to replace my broken one. Service was friendly and fast. Part arrived on time and the fit was perfect. Great job guys

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  Cowl Vent Cover
By on 6/24/2014
I am extremely pleased with the cowl vent cover. It fits perfectly and so worth the money.

Yes, I would recommend this item to a friend!


Was this review helpful to you?


Vehicle Applications

Ford Mustang - 1999 (99) - 2000 (00) - 2001 (01) - 2002 (02) - 2003 (03) - 2004 (04)


Look for Similar Items by Category

Mustang Parts » Mustang Exterior & Body » Mustang Hoods & Cowl » Mustang Cowl Vent Grille & Hardware
1994-04 Mustang Top 20 Enthusiasts' Picks
1994-2004 Mustang Parts » 1994-2004 Mustang Exterior Body » 1994-2004 Mustang Hoods & Cowl Vent Covers » 1994-2004 Mustang Cowl Vents & Wipers
1994-2004 Mustang Parts » 1994-2004 Mustang Exterior Body » 1994-2004 Mustang Hoods & Cowl Vent Covers
Top 94-04 Mustang Exterior Mods
Featured 1994-2004 Mustang Parts
Featured Mustang Parts

Products by Vehicle