You Save 11.11 % ($5.00)
One of the good things about the SVE control arms Vincente, is that since you have the good bushings in the arms, you will not need any quad shock at all.
Answered by BRYAN M. from TROY | 3 Comments 1 0
I saw a question answered by Brian about the quad shock clearence and saw that he said if you install the SVE upper and lower control arms that you DONT need to install the quad shocks. Is that true? I was going to replace ALL the bushings in my 95 gt vert as well as new shocks and saw this question and thought that I would rather purchase and install the upper and lower control arms by SVE INSTEAD! Is all that correct? Thanks John from AZ!
Asked by john P. from apache junction | Comment 0 0
He is correct. The stock control arms are stamped and fairly flimsy, and this was Fords solution to stop the wheel hop. By going to a reinforced control arm, that eliminates the need for quad shocks.
Answered by Karson S. from Hewitt | Comment 1 0
There are only 2 quad shocks on the car. The other 2 are actual shocks. You will need 2 of these for the shocks that run horizontal, and for the vertical shocks, we recommend part number KYB-KG5551 for foxes wanting to retain a similar to factory ride quality.
Answered by Karson S. from Hewitt | Comment 0 0
Ford Mustang - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93) - 1994 (94) - 1995 (95) - 1996 (96) - 1997 (97) - 1998 (98) - 1999 (99) - 2000 (00) - 2001 (01) - 2002 (02) - 2003 (03) - 2004 (04)