2011-14 Mustang J&M Caster/Camber Plates
Gain greater adjustment from your 11-14 Mustang front suspension and get the ability to dial in your alignment with a set of fully adjustable J&M Camber Caster Plates. J&M strut mounts replace the stock rubber strut mounts with a spherical bearing, allowing you full control of the suspension geometry. These plates are completely assembled and ready to install. Whether you want your alignment set for track, street, or strip, these plates will allow you to fine tune your suspension so you can get the most out of your Mustang. These plates do not need parts from the factory strut mounts (spring seats, rubber spring isolator, and spring seat bearing assemblies) The bearing mounts are completely adjustable and are 100% Pulse Mig welded for the ultimate in strength, durability, and fit. They also feature a special chrome moly replaceable teflon lined spherical bearing for a noise free quality ride.
Now coming with a LIFETIME WARRANTY from craftsmanship and defects. That is right if you are the original owner and bend the plates or wear out the bearings they will be fixed or replaced for free!
Protected By US Patents
Protected under US Patent No. 8,820,759 and patents pending.
I bought the J&M caster camber plates about two weeks ago. I was skeptical at first about the product at first and leaning towards a competitors product. After doing some research. I was quickly convinced I was purchasing a great product. IInstallation was effortless. My 2013 5.0 has the stance I've been looking for after pairing them with a set of lowering springs from LRS!
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Works as needed
Lucas K. on
Used these while installing eibach sportline springs and struts on my 2011 GT. Caster and Camber were relatively straight forward to get in spec with these installed. Only issue I faced during install is that following instructions there were not many threads exposed after using the supplied short spacer, but there are enough to give it a solid mount to the strut.
Can a local dealership or alignment shop perform an alignment if i install these plates along with the eibach pro system lowering kit or do i need to find a specialists? Asked by Jerrad B.from waco | Comment00
Best Answer: Yes, Any shop that does alignments will be able to align your car after the installation of caster camber plates Answered by Scott G.from hewitt | Comment00
J&M Products has been a world leader in the design and manufacturing of automotive suspension since 1996. Their products are built in our modern production facilities, years of research and a constant commitment to innovative technologies and manufacturing methods.
J&M Products' new product development is a result of our commitment to performance products that deliver results. Each new component must pass both quality and performance evaluations prior to a manufacturing commitment.
The flexible manufacturing process provides large volume production of specialty components for your Mustang or Lightning as well as accommodating the complexities of the small run direct-fit components. Their modern factory incorporates highly precision automated methods with the capabilities of holding a tolerance of + or - .0001 inches to insure product consistency at the highest quality levels and competitive pricing.
Shop LatemodelRestoration.com for your J&M caster camber plates, stainless steel brake lines, lower control arms, and other high quality Mustang components.
Testimonial: Awesome products and great service!!!!
Your website was great to restore my 1991 LX mustang. I found everything I needed including great tech articles and even had to return the product with no hassle at all prices were great shipping go superfast of course free could not of asked for anything more. Once again great job and I will be purchasing more in the future.