Needing to take control of your 1990-93 Mustangs front suspension? Do it by using a set of J&M Products adjustable caster and camber plates. J&M plates replace the stock rubber strut mount bushings with a spherical bearing, allowing you full control of the suspension geometry. Whether you want your alignment set for track, street, or strip, these plates will allow you to fine tune your suspension so you can get the most out of your Mustang. The bearing mounts are completely adjustable and are 100% Pulse Mig welded for the ultimate in strength, durability, and fit. They also feature a special chrome moly replaceable teflon lined spherical bearing for a noise free quality ride.
Now coming with a LIFETIME WARRANTY from craftsmanship and defects. That is right if you are the original owner and bend the plates or wear out the bearings they will be fixed or replaced for free!
I purchased these CC plates waaay too long after my lowering springs. I had it aligned the best the shop could, but I had hesitated to pull the trigger on these. Wish I hadn't. Took about an hour (both sides) to install, then off for a "real" alignment. Night and Day. An absolute must have if you've played with your 'stangs stance. Great fit and finish and a new lifetime warranty!? What's not to love?
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Nick B. on
Kept going through front tires.. Turned to latemodelrestoration for help and got these awesome J&M caster camber plates. Very pleased with them. Haven't heard any noise from them. I highly recommend.
I'm looking to swap in the UPR Tubular K member/Coil-over kit, and i already have these, i was just wondering whether or not i would have to exchange them or if they'd work on my application in my 93 LX 5.0? Asked by Ryan S.from Fairfax | Comment00
Best Answer: These caster/camber plates will work great with your UPR coil over kit. Answered by Jonathan M.from Hewitt | Comment00
J&M Products has been a world leader in the design and manufacturing of automotive suspension since 1996. Their products are built in our modern production facilities, years of research and a constant commitment to innovative technologies and manufacturing methods.
J&M Products' new product development is a result of our commitment to performance products that deliver results. Each new component must pass both quality and performance evaluations prior to a manufacturing commitment.
The flexible manufacturing process provides large volume production of specialty components for your Mustang or Lightning as well as accommodating the complexities of the small run direct-fit components. Their modern factory incorporates highly precision automated methods with the capabilities of holding a tolerance of + or - .0001 inches to insure product consistency at the highest quality levels and competitive pricing.
Shop LatemodelRestoration.com for your J&M caster camber plates, stainless steel brake lines, lower control arms, and other high quality Mustang components.
I've done the majority of my aftermarket mustang parts shopping at American muscle, recently finding out about this website I'd just like to say it is a great experience to shop here, the lay out is easy and simple to navigate, and you have thousands of parts that no other website has. The shipping is very fast and all te updates are great. I will be doin much more shopping with y'all, so thanks for being so badass haha
My name is Bryan Bayer and this is my 1988 Mustang GT. Currently going through the process of smoothing the engine bay and building a new motor. Motor is a stock short block 302 with GT40P heads and t...