Your 05-09 Mustang's stock upper control arm has a design that can result in sudden, unpredictable changes in handling, especially under hard cornering or acceleration. By replacing your stock upper control arm with a J&M adjustable upper control arm, you'll enjoy better cornering, quicker launches, and eliminate the dreaded "wheel hop".
The J&M Adjustable Upper Control Arm can be adjusted on-car for on-the-fly changes, and they are double adjustable so you can get settings just right.
J&M uses a unique 3 piece poly-ball bushing combination to keep their bushing moving freely under cornering but maintain stiffness under acceleration. The result? Your Mustang’s rear end will stay planted with no wheel hop on hard launches! Or if it’s twisty roads you’re after, this’ll also stop the rear from jumping or skipping during turns when you want to push it to the limit!
J&M Products has been a world leader in the design and manufacturing of automotive suspension since 1996. Their products are built in our modern production facilities, years of research and a constant commitment to innovative technologies and manufacturing methods.
J&M Products' new product development is a result of our commitment to performance products that deliver results. Each new component must pass both quality and performance evaluations prior to a manufacturing commitment.
The flexible manufacturing process provides large volume production of specialty components for your Mustang or Lightning as well as accommodating the complexities of the small run direct-fit components. Our modern factory incorporates highly precision automated methods with the capabilities of holding a tolerance of + or - .0001 inches to insure product consistency at the highest quality levels and competitive pricing.
Shop LatemodelRestoration.com for your J&M caster camber plates, stainless steel brake lines, lower control arms, and other high quality Mustang components.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!