Improve handling on your 05-14 Mustang and eliminate the unwanted flex and twist commonly found with the poorly designed factory panhard bar. The J&M Mustang Adjustable Panhard Rod keeps the rear axle located in the optimum position under the rear of the car, dramatically improving cornering and overall handling. You can easily fine tune your suspension with the Panhard bar installed on your mustang just by turning a wrench, no need to remove it to make adjustments.
If you lower your car, you need this bar!
By nature, a Mustang Panhard Bar will alter rear end position as ride height changes. This makes it necessary to use an Adjustable Panhard Bar when lowering your vehicle as it allows you to re-center the rear end. Adjustable Panhard Bars also become a "must-have" part if you are trying to fit the widest tires possible in the wheel well.
Ordered the J&M PHB to center my rear wheels that were shifted towards the drivers side. LMR shipped it fast, and quality was better than I expected for the price point. Install was cake (use jack stands). Greased bushings and adjusted both ends equally to stock bar length before install. Had to loosen nut that puts tension on bracket and lube sides of bushings to help slide into driver side. Adjusted center nut towards front to center axle. Car rides and looks better especially with the new SVE Drifts. Thanks LMR!
Was this review helpful to you?
John R. on
Installed this bar in my 11 GT500 as I lowered it an inch and half. And sure enough, without it, the axle is off center. Real easy install, 2 bolts and easy adjustment. Got the axle back on center. Put a few hard miles on it already with no issues.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Got my wheels back where they belong!
Derek S. on
After installing my drop the rear axle was way off. After i properly adjusted the j&m bar i had it back where it belonged!
No noticable nvh. Recommend greasing bushings before install!
J&M Products has been a world leader in the design and manufacturing of automotive suspension since 1996. Their products are built in our modern production facilities, years of research and a constant commitment to innovative technologies and manufacturing methods.
J&M Products' new product development is a result of our commitment to performance products that deliver results. Each new component must pass both quality and performance evaluations prior to a manufacturing commitment.
The flexible manufacturing process provides large volume production of specialty components for your Mustang or Lightning as well as accommodating the complexities of the small run direct-fit components. Our modern factory incorporates highly precision automated methods with the capabilities of holding a tolerance of + or - .0001 inches to insure product consistency at the highest quality levels and competitive pricing.
Shop LatemodelRestoration.com for your J&M caster camber plates, stainless steel brake lines, lower control arms, and other high quality Mustang components.
It has been ages, when I started to LOVE something called a MUSTANG. Maybe I was only 10 years old, since then, my passion was never the less. What really inspire me about the Mustang is the history a...