Improve handling on your 05-14 Mustang and eliminate the unwanted flex and twist commonly found with the poorly designed factory panhard bar. The J&M Mustang Adjustable Panhard Rod keeps the rear axle located in the optimum position under the rear of the car, dramatically improving cornering and overall handling. You can easily fine tune your suspension with the Panhard bar installed on your mustang just by turning a wrench, no need to remove it to make adjustments.
This tubular adjustable panhard rod is manufactured from high strength billet aluminum alloy making it extremely strong and very light weight. The ends are forged from 1040 super high strength steel and are then CNC machined to form the threads to the exact length and size as the rod ends and feature durable polyurethane bushings for long life.
If you lower your car, you need this bar!
By nature, a Mustang Panhard Bar will alter rear end position as ride height changes. This makes it necessary to use an Adjustable Panhard Bar when lowering your vehicle as it allows you to re-center the rear end. Adjustable Panhard Bars also become a "must-have" part if you are trying to fit the widest tires possible in the wheel well.
good quality, fit and finish. make sure you use the lube for the threads. Had it installed and adjusted in less than 20 min. pain in the butt to grease. tried to get some grease in it before install and it just pops apart. so just lube it all up and grease it after install. start with the drivers side bolt first cause it can only be greased with it hanging down, before you bolt the other side.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Carlos D. on
I love the item, easy and quick install on top of the ease of adjusting on the car.
J&M Products has been a world leader in the design and manufacturing of automotive suspension since 1996. Their products are built in our modern production facilities, years of research and a constant commitment to innovative technologies and manufacturing methods.
J&M Products' new product development is a result of our commitment to performance products that deliver results. Each new component must pass both quality and performance evaluations prior to a manufacturing commitment.
The flexible manufacturing process provides large volume production of specialty components for your Mustang or Lightning as well as accommodating the complexities of the small run direct-fit components. Our modern factory incorporates highly precision automated methods with the capabilities of holding a tolerance of + or - .0001 inches to insure product consistency at the highest quality levels and competitive pricing.
Shop LatemodelRestoration.com for your J&M caster camber plates, stainless steel brake lines, lower control arms, and other high quality Mustang components.