2011-14 Ford Mustang JLT Oil Separator for Passenger Side Black GT-Boss - S197 by JLT Performance

Mustang JLT Oil Separator for Passenger Side Black (11-14)


Details   |  Description   |  Videos   |  Customer Photos   |  Reviews   |  Community Q&A
Mustang JLT Oil Separator for Passenger Side Black (11-14)
  • JLT Mustang Oil Separator for Passenger Side Black (11-14) GT-Boss OSP-FMG1B
  • JLT Mustang Oil Separator for Passenger Side Black (11-14) GT-Boss OSP-FMG1B
  • JLT Mustang Oil Separator for Passenger Side Black (11-14) GT-Boss OSP-FMG1B

Keep excess oil from going back into your intake manifold with an 11-14 Mustang JLT oil separator!

Item #JLT-OSPFMG1B

Everyday Low Price: $119.99

In Stock!


Add to cart

Due to a warehouse move all wheel shipments will be delayed until Monday 12/22.

Benefits

  • Helps Prevent Oil From Getting Into Air Intake System

Features

  • Satin Anodized Finish
  • Mounts On Passenger Side Of Engine Bay
  • Includes Ford Motorcraft PCV Screen
  • Easy Installation

What's in the Box

  • (1) Oil Separator W/ Hoses
  • Installation Fittings
  • Installation Instructions

Made in the USA

Product Description

JLT Performance’s newest product to keep oil out of your intake is the 2011-2014 Mustang 5.0L Oil Separator. During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors, can coat your blower rotors, intercooler fins and even dilute your gas, lowering its octane level. This happens on all engines and is even worse when supercharged as crankcase pressures are increased.

To combat this, JLT has developed an oil separator of their own design. Milled from solid billet aluminum this is a rock solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O ring seal to prevent any leaks. JLT took this unit a step further and added a Ford Motorcraft metal mesh PCV Pre Filter element. This element collects the last bit of oil droplets and drains back into the tank when the engine is shut down. JLT uses this exact filter in their hugely successful JLT Pre Filters for the 4.6 DOHC engines. The tank holds 2 oz of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every oil change and you will never come close to filling it.

Note:
This part number is designed to be mounted on the passenger side of the engine compartment.


JLT Warranty
JLT performance inc, will repair or replace any part of their product found upon our inspection to be defective in workmanship or material within 1 year from the purchase date for the original purchaser. Air filters will not be accepted for return unless they are still in sealed plastic bag.


Product Videos

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!


2 Customer Photos



Community Q&A

Have a question about this item?
Ask the community

Customer Reviews


5.0
out of 5 stars
5 stars
8 reviews
5 stars    8
4 stars    0
3 stars    0
2 stars    0
1 star    0

100%
OF CUSTOMERS
RECOMMEND THIS PRODUCT
8 of 8 REVIEWS
RECOMMEND THIS PRODUCT
8 of 8 REVIEWS


  Great fit best hundred dollars ever spent !
By on 4/24/2014
I went to the track and did six 1/4 miles pases it caught about 1 ounce of oil but I talked to Justin from jtl and he said if u still see oil from in the intake tube to buy one for the drivers side! Best hundred dollars I ever spent . Thanks Latemodel Restoration!!!!!!

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  Works good Looks good!
By on 3/19/2014
I purchased the passenger side jlt oil separator about two weeks ago and it works great! Even in just two weeks it has caught a good bit of oil. It also looks great and isn't big. Definitely a must have for 5.0 owners!

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  Must Have for 5.0L Owners
By on 10/6/2014
Image uploaded by Neal J. I recently added the JLT passenger side oil separator before a 80 mile round trip drive and 3 1/8th mile race track runs. It already had captured enough oil to roll around in the catch canister.

After removing my intake manifold and seeing how much oil was in there I figured this would be a wise investment. All Boss 302, 3.7L V6, GT and GT500 should have invest in this product. I will be adding the driver side soon just for preventative measures!

Thanks for the free shipping and great prices LMR!

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  JLT oil separator
By on 11/12/2014
Only installed this a week ago so can not comment on results. However, I can say this, upon checking the stock lines there was small amounts of oil on each end of hose. So safe to say that this oil separator will help eliminate that. Easy to install, remove stock line then click this one in place. I did not have to adjust or level mine, it was spot on.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  Very Nice Piece!
By on 2/10/2014
Image uploaded by Dave I've had this oil separator on for a month now and it has already collected a small amount of oil that would have otherwise got sucked back in to my intake. It's a high quality piece and install is a 30 second job. I ordered the wrong one in error and LMR took it back and had the right one back to me in less than a week. No complaints at all!!

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  Perfect & subtle
By on 5/2/2014
Bought one a couple weeks ago and went on in 2mins tops (took more time to open the box haha) and it blends in with the engine bay perfectly HIGHLY recommend this item!

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  works great
By on 4/14/2014
Ordered and received 3 days later, installed in 5min. Looks like it was meant to be there, glad to have the protection.

Yes, I would recommend this item to a friend!


Was this review helpful to you?

  Good Service
By on 10/21/2014
Great Service for LRS

Yes, I would recommend this item to a friend!


Was this review helpful to you?


Vehicle Applications

Ford Mustang - 2014 (14)


About This Brand


JLT Performance
JLT has become one of the industry leaders in Mustang & Lightning performance by bringing in some of the highest performance gains with their performance cold air intake systems. By designing and engineering their own products, they have been able to see huge gains in horsepower and torque in developing direct fit air induction kits. Shop Latemodel Restoration for JLT cold air intake kits and oil separators to get the most performance out of your Mustang or Lightning!

Look for Similar Items by Category

Ford Mustang Parts » Mustang Engine & Underhood » Mustang Oil System » Mustang Oil Separator Kits
2010-2014 Mustang Parts » 2010-2014 Mustang Engine & Underhood » 2010-2014 Mustang Oil System » 2010-2014 Mustang Oil Separator Kits
2010-2014 Mustang Parts » 2010-2014 Mustang Engine & Underhood » 2010-2014 Mustang Oil System

Products by Vehicle